Connecting An Ai-Net Compatible Av Head Unit (Ina-W910), Alpine Navigation System, Ai-Net Compatible Changer And External Amplifier - Alpine PXA-H800 Service Manual

Connecting an Ai-NET compatible AV Head Unit (INA-W910), ALPINE Navigation System, Ai-NET
compatible Changer and External Amplifier
Not Used
1 Use when connected with the RUX-C800 Commander (sold separately).
*
2
* Use when connected with an Optical Digital compatible Changer.
3 Set the system switch to [EQ/DIV] or [EXT AP]. For details, refer to the Owner's Manual for the product connected.
*
4
* Setting the system switch is required. For details, refer to the Owner's Manual for the connected changer.
5 If the Ai-NET compatible Changer is a DVD Changer (DHA-S690 Series or DHA-S680 Series), do not connect its Switched Power Lead
*
(Red).
6 If the Ai-NET compatible Changer is a DVD Changer (DHA-S690 Series or DHA-S680 Series), do not connect the Remote Control Eye in
*
a system that uses an Ai-NET compatible AV Head Unit. (Connection of the remote input cord (white/brown) is required.) Use the Remote
Control Eye in a system that uses any other manufacturer's monitor. For details, refer to the connected DVD changer's instruction manual.
7
* If connecting DVA-5210, connect it between the unit and the head unit using an additional Ai-NET extension cable. In this case, also
connect the audio output jacks (L=white/R=red) of DVA-5210 to the AUX INPUT CH-1 (L)/CH-2 (R) jacks of the unit.
Ai-NET extension cable (Changer included)
Fiber optic cable (Sold separately) *
Computer
connection
terminal
Remote On Lead
Blue/White
Guide Control Lead
White/Green
Navigation audio
input connector
Remote Control
Output Lead
Blue/White
Ground Lead
Black
Battery Lead
Yellow
Fuse 10A
Illumination Lead* 1
Orange
Fiber optic cable (Sold separately)
Ai-NET extension cable*
2
To Digital Output
Terminal (Optical)
Audio output jacks
To External Amplifier
(see page 10)
Commander cable
(RUX-C800 included)
Not Connected
KCE-900E (Sold
Guide Control separately)
Lead
Guide
White/Green
Signal I/F
RCA extension cable
for External
(Sold separately)
Navigation
To GUIDE Output
Terminal
To Remote On Lead of
an External Amplifier
Connect to a metal
part of chassis body
with a screw.
12V
Illumination
1
Lead*
Ai-NET compatible
Orange
AV Head Unit
(INA-W910) (Sold
separately) *
To Digital
Output Terminal
(Optical)
7
To Ai-NET Output
Terminal
Ai-NET compatible
Changer * 4, 5
*
To Remote
Control Eye Jack
Remote Control
Eye (DVD Changer
included) *
RUX-C800 (Sold separately)
ALPINE
RGB Cable
Navigation
System (Sold
To RGB
separately)
Output
Terminal
To RGB
Output
Terminal
To RGB Input Terminal
(KCE-900E included)
To RGB Input Terminal
3
To Ai-NET Output
Terminal
6