Table of Contents
Advertisement
4. Removing Power board ass'y
4-1.
Removing Power board ass'y
4-1-1. Remove the connectors (x3) on Power board ass'y 203 .
4-1-2. Remove Screws 104 (x4), then remove Power board ass'y 203 .
This is the disassembling procedure after the disassembling of:
1. Removing Base unit: Page 9
2. Removing Rotation unit: Page 9
Refer to Step 11-2 on page 32 and Step 12-1 on page 33 for reassembling.
Figure of Step 4-1
–11–
1
2
3
203
Power board ass'y
104
Screws
2x4 mm (x4)
104
Advertisement
Table of Contents
