Reinstalling The Software; General Installation Procedure - Siemens SIMATIC Box PC 827B Getting Started

Commissioning

6.3 Reinstalling the software

After you have entered all necessary information and after the operating system
setup is completed, the PC is automatically restarted and displays the user interface of the
relevant operating system.
When you switch on the PC now, the user interface of the operating system or logon dialog
of the operating system (with Windows XP Embedded) is automatically opened when the
startup routine is completed.
6.3 Reinstalling the software
6.3.1

General installation procedure

In case of software errors, you can reinstall your software using the Recovery CD, the
Documentation and Drivers CD or the Restore DVD.
Recovery CD:
Contains the tools for setting up hard disk drives and the operating system.
Documentation and Drivers CD:
Contains the documentation and the hardware drivers.
Restore DVD:
Contains a hard disk image file with the original software (operating system with installed
hardware drivers).
32
SIMATIC Box PC 827B
Getting Started, 07/2008, A5E01127540-02