Reinstalling The Software - Siemens SIMATIC IPC547C Getting Started

6.3

Reinstalling the software

General installation procedure
In case of errors in your software installation, you can reinstall your software using the
Recovery CD or DVD, the Documentation and Drivers CD or the Restore DVD.
● Recovery CD or DVD: The Recovery CD/DVD contains the Windows PE user interface
● Documentation and Drivers CD: Contains the documentation and the hardware drivers.
● Restore DVD: Contains a hard disk image file with the original factory software (operating
Restoring the factory state
● Place the Restore DVD into the drive and restart the device using the on/off switch.
● During the self-test phase, press the F12 key. The "Boot Menu" is displayed when
● Select the optical drive using the cursor keys.
● Now follow the instructions on the screen.
For information on the functions, refer to the README.TXT file on the Restore DVD.
SIMATIC IPC547C
Getting Started, 06/2009, A5E02411398-01
with tools for configuring the hard drives, and for installation of the operating system and
of the languages supported by the operating system (MUI.).
The base language of the operating system to be installed is English. If you want to
integrate additional languages, you will need to subsequently install them from Recovery
CD2 or DVD.
system with installed hardware drivers).
initialization is completed.
CAUTION
All existing data, programs, user settings, authorizations and license keys on the drives
will be deleted and are thereby lost.
Commissioning
6.3 Reinstalling the software
27