Appendix; Guidelines And Declarations - Siemens SIMATIC IPC547C Getting Started

Appendix

A.1

Guidelines and declarations

Notes on the CE Label
EMC guideline
This product meets requirements of EC directive ™2004/108/EEC Electromagnetic
Compatibility", and is designed for operation in the following fields of application in according
with this CE marking:
Scope of application
Industrial area
Residential and commercial areas and
small businesses
The devices conform with EN 61000-3-2:2006 (harmonics) and
EN 61000-3-3:1995+A1:2001+A2:2005 (voltage fluctuations and flicker).
Low-voltage guideline
The devices complies with the requirements of the EC Directive 2006/95/EC "Low Voltage
Directive". Conformance with this standard has been verified according to EN 60950-1.
Conformity certificates
The EC declaration of conformity and the corresponding documentation are made available
to authorities in accordance with the EC directives stated above. Your local sales
representative can provide these on request.
Observing the installation guidelines
The installation guidelines and safety instructions specified in this documentation must be
observed for commissioning and operation.
Connecting peripherals
Noise immunity requirements to EN 61000-6-2 are met if connected peripherals are suitable
for industrial applications. Peripheral devices may only be connected via shielded cables.
SIMATIC IPC547C
Getting Started, 06/2009, A5E02411398-01
The following applies to the SIMATIC product described in this documentation:
Requirements for
Interference emission
EN 61000-6-4 : 2007
EN 61000-6-3 : 2007
A
Immunity to interference
EN 61000-6-2 : 2005
EN 61000-6-1 : 2007
31