Appendix; Guidelines And Declarations - Siemens SIMATIC IPC647C Getting Started

Appendix

A.1

Guidelines and Declarations

Notes on CE marking
The following applies to the SIMATIC product described in this documentation:
EMC directive
This product fulfills the requirements of EC directive 2004/108/EEC "Electromagnetic
Compatibility", and is designed for operation in the following fields of application in
accordance with this CE marking:
Fields of application
Domestic area, commercial and
light industrial environments
Industrial area
The devices conform with EN 61000-3-2:2006 (harmonics) and EN 61000-3-
3:1995 +A1:2001 +A2:2005 (voltage fluctuations and flicker).
Low voltage directive
The devices comply with the requirements of the EC Directive 2006/95/EC "Low Voltage
Directive". Compliance with this directive has been verified according to EN 60950-1:2006 +
A11:2009.
Declaration of conformity
The EC declaration of conformity and corresponding documentation are available to
responsible authorities in accordance with EC directives stated above. Your sales
representative can provide these on request.
Observe the installation guidelines
The installation guidelines and safety instructions specified in this documentation must be
observed for commissioning and operation.
SIMATIC IPC647C
Getting Started, 12/2010, A5E02669344-02
Requirements for
Radiated interference
EN 61000-6-3: 2007
EN 61000-6-4: 2007
Noise immunity
EN 61000-6-1: 2007
EN 61000-6-2: 2005
A
37