Care; Specifications; Troubleshooting - Philips BDP2700/12 User Manual

Care

Caution
•
Never use solvents such as benzene, thinner, cleaners
available commercially, or anti-static sprays intended
for discs.
Clean discs
Wipe the disc with a micro fibre cleaning cloth from
the centre to the edge in a straight line movement.
Specifications
Note
•
Specifications are subject to change without notice
Video
• Signal system: PAL / NTSC
• Composite video output: 1 Vp-p (75 ohm)
• HDMI output 480p, 576p, 720p, 1080i, 1080p,
1080p24
Audio
• 2 Channel analog output
• Audio Front L&R : 2 Vrms (> 1 kohm)
• Digital output: 0.5 Vp-p (75 ohm)
• Coaxial
• HDMI output
• Sampling frequency:
• MP3: 32 kHz, 44.1 kHz, 48 kHz
• WMA: 44.1 kHz, 48 kHz
• Constant bit rate:
• MP3: 112 kbps - 320 kpbs
• WMA: 48 kpbs - 192 kpbs
USB
• Compatibility: Hi-Speed USB (2.0)
• Class support: UMS (USB Mass Storage Class)
Main unit
• Power supply rating: 220~230V ~AC, ~50 Hz
• Power consumption: 18 W
• Power consumption in standby mode: < 1 W
• Dimensions (w x h x d): 435 x 44 x 223 (mm)
• Net Weight: 2.15 kg
Accessories supplied
• Remote control and batteries
• Quick start guide
• User manual
• CD-ROM built in multi-lingual user manual
22 EN
Laser Specification
• Laser Type:
• BD Laser Diode: SLD3134VL
• DVD Laser Diode: SLN6167XL
• CD Laser Diode: SLN6167XL_
• Wave length:
• BD: 405nm(Typ.)
• DVD: 658nm(Typ.)
• CD: 790nm(Typ.)
• Output power:
• BD: Max. ratings: 20mW
• DVD: Max. ratings: 7mW
• CD: Max. ratings: 7mW

8 Troubleshooting

Warning
•
Risk of electric shock. Never remove the casing of the
player.
To keep the warranty valid, never try to repair the
player yourself.
If you have problems using this player, check the
following points before you request service. If you still
have a problem, register your player and get support
at www.philips.com/welcome.
Main unit
No reaction to the remote control.
• Connect this player to the power outlet.
• Point the remote control at the IR sensor
located on the front panel of this player.
• Insert the batteries correctly.
• Insert new batteries in the remote control.
Picture
No picture.
• See TV manual for correct video input
selection. Change the TV channel until you see
the Philips screen.
No picture on HDMI connection.
• If this player is connected to an unauthorized
display device with an HDMI cable, the audio/
video signal may not be output.
• Check if the HDMI cable is faulty. Replace a
new HDMI cable.
• On the remote control, press
press "731" (numeric buttons) to recover
picture display.
and then