Download
Share
Print this page
Philips BDP2180 Service Manual
  1. Manuals
  2. Brands
  3. Philips Manuals
  4. Blu-ray Player
  5. BDP2180
  6. Service manual

Philips BDP2180 Service Manual

Hide thumbs Also See for BDP2180:

Advertisement

Quick Links

Blu-ray Player
Service
Service Manual
. Location of PCB Boards,Version Variation and Repair Scenario Matrix.....1-2
. Technical Specifications.........................................................1- 3
. Safety Instruction, Warning & Notes........................................1- 4
. DFU Instruction..............................................................................2-1
. Mechanical and Dismantling Instructions....................................3-1
. Software Upgrades .......................................................................
. Trouble Shooting Chart......................................................
. Wiring Diagram..................................................................6-1
. Electrical Diagrams and Print-layouts......................................7-1
. Votages and Waveforms for Connection Pins...........................8-1
. Pin Description & Block Diagrams of ICs..................................9-1
. Set Mechanical Exploded view & Part list...............................10-1
. Revision List.................................................................................11-1
©Copyright 2013 Philips Consumer Electronics B.V. Eindhoven, The Netherlands
All rights reserved. No part of this publication may be reproduced, stored in aretrieval system or
transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise
without the prior permission of Philips.
Published by Arya & Sophie - 1305 Printed in The Netherlands Subject to modification
Version 1.1

TABLE OF CONTENTS

BDP2180/12/05/X78
Page
4-1
.
5-1
.
CLASS 1
LASER PRODUCT
3141 785 39131
GB
PHILIPS

Advertisement

loading

Related Manuals for Philips BDP2180

Summary of Contents for Philips BDP2180

  • Page 1: Table Of Contents

    . Set Mechanical Exploded view & Part list.…………………..….…10-1 . Revision List.................11-1 CLASS 1 ©Copyright 2013 Philips Consumer Electronics B.V. Eindhoven, The Netherlands All rights reserved. No part of this publication may be reproduced, stored in aretrieval system or LASER PRODUCT transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise without the prior permission of Philips.
  • Page 2 PCB BOARD LOCATIONS Main Board Loader Power Board Front Board VERSION VARIATIONS Type / Versions BDP2180 Service Policy /X78 Board in used MAIN BOARD FRONT BOARD LOADER POWER BOARD C -- Component Lever Repair Tips： ＊ M -- Module Lever Repair...
  • Page 3 Remote control and batteries DVD-Video, DVD+R/+RW, DVD-R/-RW, User manual DVD+R/-R DL (Dual Layer) Optional accessory VCD/SVCD A wireless Philips USB adapter(named Audio CD, CD-R/CD-RW, MP3 media, WUB1110, sold separately) Multimedia connections: Wi-Fi DivX (Ultra)/DivX Plus HD media, MKV 802.11b/g/n media...

  • Page 4: Safety Instruction, Warning & Notes

    Safety instruction, Warning & Notes Safety instruction 1. General safety 2.Laser safety Safety regulations require that during a repair: This unit employs a laser. Only qualified service personnel . Connect the unit to the mains via an isolation transformer. may remove the cover, or attempt to service this device .
  • Page 5 Warning 1.General 2. Laser . All ICs and many other semiconductors are susceptible to . The use of optical instruments with this product, will electrostatic discharges (ESD). Careless handing during increase eye hazard. repair can reduce life drastically. Make sure that, during .
  • Page 6 Solder Joint...
  • Page 7 - lead free BGA-ICs will be delivered in so-called respected by the workshop during a repair: ‘dry-packaging’ (sealed pack including a silica gel Use only lead-free solder alloy Philips SAC305 with pack) to protect the IC against moisture. After order code 0622 149 00106. If lead-free solder-paste is...
  • Page 8 Before you connect this Blu-ray disc/ DVD player, read and understand all accompanying instructions.
  • Page 9 Register your product and get support at www.philips.com/welcome HDMI COAXIAL COAXIAL...
  • Page 10 1 HDMI HDMI VIDEO COAXIAL AUDIO LINE OUT HDMI 2 COAXIAL HDMI VIDEO COAXIAL AUDIO LINE OUT COAXIAL COAXIA A L...
  • Page 11 SOURCE...
  • Page 12 BD/BD 3D DVD/VCD/CD DivX Plus HD/MKV MP3 / JPEG...
  • Page 13 2 Use your Blu- Basic play control ray disc/ DVD player Congratulations on your purchase, and the support that Philips offers (e.g. product software upgrade), register your product at www.philips.com/welcome.
  • Page 14 During play, press the following buttons to Video, audio and picture control. options Button Action Turn on the player, or switch More options are available for video or picture to standby. play from a disc or USB storage device. Access the home menu. Stop play.
  • Page 15 [Zoom]: Zoom into a video picture. Press Audio options to select a zoom factor. [Repeat]: Repeat a chapter or title. [Repeat A-B]: Mark two points within a chapter for repeat play, or turn off repeat mode. [Picture settings] color setting. Press repeatedly to cycle through the following options.
  • Page 16 Character Languages BonusView on Blu-ray [Standard] English, Albanian, Danish, View special content (such as commentaries) in Dutch, Finnish, French, Gaelic, a small screen window. German, Italian, Kurdish (Latin), This feature is only applicable to Blu-ray discs Norwegian, Portuguese, Spanish, compatible with BonusView (also known as Swedish, and Turkish picture in picture).
  • Page 17 Philips Wi-Fi USB adapter (named WUB1110). Note Te Wi-Fi USB Adapter (WUB1110) is not included. To purchase this adapter, visit shop.philips.com. If the Philips BD-Live services vary from discs and countries. online shop is not available in your country, please When you use BD-Live, data on the disc and this player contact Philips customer service.
  • Page 18 (Media) tab, and then select the disc or with the network router, and networking principles. If necessary, read documentation accompanying network USB source. components. Philips is not responsible for lost, damaged » The folders in the data disc or USB or corrupt data. storage device are displayed.
  • Page 19 HDMI CEC (Consumer Electronics Control) protocol. You can use a single remote control to control EasyLink compliant devices that are connected through HDMI. Philips does not guarantee 100% interoperability with all HDMI CEC devices. Connect the HDMI CEC compliant devices...
  • Page 20 2-13 3 Change settings [Watch 3D video]: Set to 3D or 2D output when playing a Blu-ray 3D disc. The player must be connected to a 3D TV through HDMI. This section helps you to change the settings of this player. Note If you change a setting, make sure that the TV supports the new setting.
  • Page 21 2-14 Network the TV screen (this feature works with (installation, status...) some Philips TVs only). [Change Password]: Set or change a password to play a restricted disc. Press . Select [Setup] > [Network] to access the password or if you have forgotten your network setup options.
  • Page 22 2-15 ® [DivX VOD Code]: Display the ® DivX registration code or the deregistration code for this player. [Version information]: Display the software version of this player. [Restore default settings]: Reset this player to the default settings made at the factory, except for password and parental control level.

  • Page 23: Mechanical And Dismantling Instructions

    Mechanical and Dismantling Instructions Dismantling Instruction Detailed information please refer to the model set. The following guidelines show how to dismantle the player. Step1: Open the top cover. Remove 2 screws on the back panel,pull back the top cover and then open it. (Figure 1) Figure 1 Step:2Remove the front panel.
  • Page 24 Mechanical and Dismantling Instructions Dismantling Instruction Detailed information please refer to the model set. Step3: Dismantle the power board and main board.Disconnect connectors(XP7,XP5,XP10),remove 1 screw on power board and 2 screws on the back panel.(Figure 3) Step4: Dismantle the loader.Remove 2 screws beside the loader,then pull up the loader.(FIgure 3) XP10 CN501 Figure 3...

  • Page 25: Software Upgrades

    Software Upgrade  Preparation to Software Upgrade  1. Procedure for software upgrade    a) Upgrade from USB:    1) Go to www.philips.com/support to check if the latest software    version  is available for this player.  2) Build UPG_ALL file in USB    3) Copy the upgrade file to USB UPG_ALL folder.    4) Then  insert  USB  ,start  up  DUT  enter  into  HOME  screen  ,select  Setup >>Advance>> software update >>USB.    5) When upgrade file detected, select "Yes" to upgrade, select    "No" to cancel.    6) Once you start upgrade, please don’t power off the DUT, after   ...
  • Page 26 3. Factory Reset Steps    Press"Home" button on remote control‐‐‐>Press"0""3""5""8"‐‐‐>    Select Restore‐‐‐>Press"OK" on remote control ...

  • Page 27: Trouble Shooting Chart

    Trouble shooting chart No display on LED, and buttons do not work LED light or buttons do not work Check every supply Fix the open circuit or short circuit voltage on PSU, main which may exist on PCBs and board and front board is cables normal Check whether every pin of...
  • Page 28 Trouble shooting chart No audio output ( only for BDP2130 ) No audio output Check if the voltage Fix the open circuit or short on R52 and CE204 is circuit which may exist on PCBs normal Fix the RCA socket Check if the RCA socket is OK Check Fix the bad component or...
  • Page 29 Trouble shooting chart Can not control by remote control Remote control does not work Check whether the remote Replace the batteries of remote control works well. control, or fix the remote control. Check whether every pin of board connects well main Fix XP1 or XP3 board, especially the 3...
  • Page 30 Trouble shooting chart Can’t read disc or can’t open the disk door Can’t read disc or can’t open the disk door Check the connection of 4pin cable to the Check whether load main board or replace the loader motor motor runs well Check whether 45pin and 8pin cable from main board Fix the connection 45pin cable or...
  • Page 31 Trouble shooting chart No video display No Video display Check weather the HDMI Connect the HDMI cable to the screen cable has connect to the screen Check HDMI Replace the HDMI JACK JACK is broken Replace the main board...
  • Page 32 Trouble shooting chart Can not connect to network by LAN socket Can not connect to network Check weather twisted pair to Connect twisted pair Internet connect to Internet Check if the LAN socket Fix or replace and U12 is broken socket or U12 Check if the soldering and Solder or fix the abnormal...
  • Page 33 Trouble shooting chart Can not connect to network by wifi Can not connect to network Check whether USB401 Fix it on main board connects wifi model well to Check if wifi circuit is OK, Fix the circuit or especially the 4 PIN in replace wifi model USB401...
  • Page 34 Wiring and Block Diagram for BDP2180: NETWORK HDMI COAXIAL 01U00RJ45-403 01UHDMIIF-101 01USPDIFT-102 RESET NFLASH(256MB) 3.3V 01U0RESET-302 01UNANDFL-101 LOADER MT8551 OSC(27MHz30ppm) A CH DDR3 ASA L9830+IM422 1.5V 01UCRYSTA-502 (128MB/256MB) (ASA L9830+SANYO415 RF SIGNAL MT8560 and OTHER or SANYO416) 45PIN FFC B CH DDR3 3.3V...
  • Page 35 Front Board Circuit Diagram for BDP2180/12/05: OPEN/CLOSE OPEN/CLOSE KEY1 KEY1 4PIN/2.0mm 4PIN/2.0mm USB_VCC OPEN/CLOSE R305 R305 KEY2 KEY2 USBM STANBY/ON STANBY/ON connector USBP GND1 STANBY/ON R303 R303 C313 C313 C312 C312 100pF/50V/NP0 100pF/50V/NP0 100pF/50V/NP0 100pF/50V/NP0 6PIN/2.0mm 6PIN/2.0mm OPEN/CLOSE STANBY/ON IROUT IRM_8.3mm...
  • Page 36 Front Board Circuit Diagram for BDP2180X/78: OPEN/CLOSE OPEN/CLOSE KEY1 KEY1 4PIN/2.0mm 4PIN/2.0mm USB_VCC OPEN/CLOSE R305 R305 KEY2 KEY2 USBM STANBY/ON STANBY/ON connector USBP GND1 STANBY/ON R303 R303 C313 C313 C312 C312 100pF/50V/NP0 100pF/50V/NP0 100pF/50V/NP0 100pF/50V/NP0 6PIN/2.0mm 6PIN/2.0mm OPEN/CLOSE STANBY/ON IROUT VCC1 R328 R328...
  • Page 37 Front Board Circuit Diagram for BDP2100X/78: VCC1 IR IR IRM_7.7MM IRM_7.7MM...
  • Page 38 Power Board Circuit Diagram:Connector for BDP2180/12/05/X78 CY502 CY502 1000pF/250VAC 1000pF/250VAC L502 L502 C501 C501 R515 R515 R514 R514 R503 R503 R502 R502 1500pF/1KV 1500pF/1KV 150K 150K 150K 150K D503 D503 D501 D501 R501 R501 T501 T501 LF501 LF501 CE501 CE501...
  • Page 39 Power Board Circuit Diagram:Power Supply for BP2180/12/05/X78 DuPont pin 14PIN/2.0mm 14PIN/2.0mm +12V +12V +12V +12V +12V IROUT IROUT IROUT IROUT IROUT USBP USBP USBP USBP USBP USBM USBM USBM USBM USBM USB_VCC USB_VCC USB_VCC USB_VCC USB_VCC VSTB VSTB VSTB VSTB VSTB VSCK VSCK...
  • Page 40 Front Board Print-layout(bottom side) for BDP2180/12/05:...
  • Page 41 Front Board Print-layout(bottom side)for BDP2180X/78:...
  • Page 42 Front Board Print-layout(bottom side)for BDP2180X/78:...
  • Page 43 Power Board Print-layout(bottom side) for BDP2180/12/05/X78:...
  • Page 44     Voltages for per connection pin      XP3‐‐‐From Main Board Connect to Front Board    Pin No  Pin Assin  Remarks    1  12V  +12V    2  GND      3  IR_IN      4  VCC  +5V    5  GND      6  USBP1  HIGH SPEED SIGNAL    7  USBM1    8  USB_VCC1  +5V ...
  • Page 45 FUNCTIONAL BLOCK DIAGRAM FOR MANI IC MT8551 NAND DDR3 256/384MB Audio 7.1 CH 2 CH MT8551 S/PDIF Motor Driver HDMI HD+SD Decode Component 810MHz ARM11 Ethernet CVBS 400MHz AudioDSPx3 HDMI 1.4 Ethernet...
  • Page 46 PIN ASSIGNMENT...
  • Page 47 PIN DESCRIPTION Symbol Type Description Digital power/ground DVCC12_K Power 1.2 V digital power...
  • Page 48 Symbol Type Description DGND12_K Ground Digital ground AA19 AB13 AC18...
  • Page 49 Symbol Type Description DVCC33_IO Power 3.3 V digital IO power DVCC33_IO_S Power 3.3 V digital IO power for Stand-By Module DDRVCCIO Power 1.5 V digital IO power XTAL/PLL AVDD33_MEM AA21 Power 3.3 V Analog Power for MEMPLL AVSS33_MEM AB19 Ground Analog Ground for MEMPLL AA22 TN_MEMPLL...
  • Page 50 Symbol Type Description Audio PWM DAC interface AVDD33_DAC Power 3.3V Analog Power AVSS33_DAC Ground Analog Ground Multiple function: (1) Audio output bit clock (2) Audio PWM output (3) GPIO Multiple function: (1) Audio output master clock (2) Audio PWM output (3) GPIO Audio interface Multiple function:...
  • Page 51 Symbol Type Description Multiple function: (1) Audio output serial data 1 (2) Audio output master clock (3) Micophone input master clock (4) Video out DE signal AOSDATA1 (5) External Interrupt 1 (6) 3th RS232 TX (7) Slave I2C clock (8) PWM control signal output (9) Ethernet Activity LED (10) GPIO Multiple function:...
  • Page 52 Symbol Type Description Multiple function: SPDIF (1) SPDIF digital audio output (2) GPIO Analog Video Out Interface AVDD33_VDA Power 3.3V Analog Power AVDD33_VDA Power 3.3V Analog Power AVSS33_VDAC Ground Analog Ground AVSS33_VDAC Ground Analog Ground VDACB_OUT Analog DAC output VDACG_OUT Analog DAC output VDACR_OUT...
  • Page 53 Symbol Type Description Multiple function: (1) Video out 16-bit 422 mode: C0 (2) External Interrupt 4 (3) 3th RS232 RX VOUTD0 (4) Ethernet Link LED (5) NAND Flash Data input/output bit 4 (6) Secure Disk interface data bit 1 (7) GPIO Multiple function: (1) Video out 16-bit 422 mode: C1 (2) Slave I2C clock...
  • Page 54 9-10 Symbol Type Description Multiple function: (1) Video out 16-bit 422 mode: Y0 (2) Microphone input master clcok (3) 2nd RS232 TX VOUTD8 (4) Slave I2C clock (5) PWM control signal output (6) Ethernet Activity LED (7) NAND Flash Data input/output bit 1 (8) GPIO Multiple function: (1) Video out 16-bit 422 mode: Y1...
  • Page 55 9-11 Symbol Type Description Multiple function: (1) Video out 16-bit 422 mode: Y5 (2) SPDIF input bit clock (3) 2nd RS232 RX VOUTD13 I/O, 5V (4) Slave I2C data (5) External Interrupt 1 (6) Ethernet Duplex LED (7) NAND Flash command latch enable (8) GPIO Multiple function: (1) Video out 16-bit 422 mode: Y6...
  • Page 56 9-12 Symbol Type Description CLK_P Analog HDMI TX clock differential pair (P) NAND Flash Interface Multiple function NFALE (1) NAND Flash address latch enable (2) GPO Multiple function NFCEN (1) NAND Flash chip enable (2) GPO Multiple function (1) NAND Flash 2 chip enable (2) 2nd RS232 TX (3) External Interrupt 2...
  • Page 57 9-13 Symbol Type Description Multiple function NFD7 (1) NAND Flash Data input/output bit7 (2) GPIO Multiple function NFRBN (1) NAND Flash ready/busy (2) GPIO Multiple function (1) NAND Flash 2 ready/busy (2) 2nd RS232 RX (3) External Interrupt 1 NFRBN2 (4) 3th RS232 RX (5) Slave I2C data (6) PWM control signal output...
  • Page 58 9-14 Symbol Type Description AE24 RBA1 Memory bank address bit 1 AD24 RBA2 Memory bank address bit 2 AC22 RCAS_ Memory column address strobe AE23 RCKE Memory clock enable RCLK0 Memory clock 0 positive RCLK0_ Memory clock 0 negative RCS_ Memory chip select RDQ0 Memory data bit 0...
  • Page 59 9-15 Symbol Type Description RRAS_ Memory row address strobe RVREF0 Memory VREF AE25 RWE_ Memory write enable AC25 RRESET Memory reset DRAM Channel B AC10 RA0_B Memory address bit 0 RA1_B Memory address bit 1 RA2_B Memory address bit 2 AB10 RA3_B Memory address bit 3...
  • Page 60 9-16 Symbol Type Description AE13 RDQ3_B Memory data bit 3 AD21 RDQ4_B Memory data bit 4 AC21 RDQ5_B Memory data bit 5 AD20 RDQ6_B Memory data bit 6 AC20 RDQ7_B Memory data bit 7 AC15 RDQ8_B Memory data bit 8 AC16 RDQ9_B Memory data bit 9...
  • Page 61 9-17 Symbol Type Description Multiple function (1) Serial interface control line GPIO0 I/O, 5V (2) Slave I2C clock (3) External Interrupt 3 (4) GPIO Multiple function (1) Serial interface data line GPIO1 I/O, 5V (2) Slave I2C data (3) External Interrupt 3 (4) GPIO Multiple function (1) Video output DE signal...
  • Page 62 9-18 Symbol Type Description Multiple function (1) Microphone input bit clock (2) 3th RS232 TX (3) External Interrupt 2 GPIO6 I/O, 5V (4) Slvae I2C clock (5) PWM control signal output (6) Ethernet Speed LED (7) GPIO Multiple function (1) Microphone input master clock (2) 3th RS232 RX (3) External Interrupt 4 GPIO7...
  • Page 63 9-19 Symbol Type Description Reserved for debug-only Uart pins UATXD I/O, 5V (1) 1 RS232 TX (2) T8032 RS232 TX Multiple function (1) VFD clock VCLK I/O, 5V (2) GPIO (3) Slave I2C data (4) Serial interface data line Multiple function (1) VFD data VDATA I/O, 5V...
  • Page 64 9-20 Symbol Type Description AVDD33_COM Power PLL/BG 3.3V analog power AVSS33_LD Ground Line driver analog ground AVSS33_PLL Ground PLL/BG analog ground AVDD12_REC Power ADC analog power AVSS12_REC Ground ADC analog ground TXVP_0 Analog Ethernet TD+ TXVP_1 Analog Ethernet RD+ TXVN_0 Analog Ethernet TD- REXT...
  • Page 65 9-21 Symbol Type Description 3.3V LVTTL High frequency modulation mode selection signal output, or I/O, LDD serial interface command enable. The pin is spike-free at 5V-tolerance, power-on stage. Slow slew, FECMOD 2, 4, 6, 8mA PDR, 75K pull- down (0V) Analog Disk motor control output.
  • Page 66 9-22 Symbol Type Description 3.3V LVTTL LDD serial interface data. The pin is spike-free at power-on I/O, stage. The pin is not allowed to pull-up in circuit layout. 5V-tolerance, Alternate function: FEGIO0 2,4,6,8 mA 1. Internal monitored signal output PDR, 2.
  • Page 67 9-23 Symbol Type Description Read gain switch 6. The pin is not allowed to pull-up in circuit layout. Alternate function : Analog FEGIO6 1. SIDM Output 2. LCD serial interface command enable. 3. Internal monitored signal output 4. General IO. 3.3V LVTTL General IO.
  • Page 68 9-24 Symbol Type Description 3.3V LVTTL High frequency modulation enable signal output, or LDD serial I/O, interface CLK or I2C SCL. The pin is spike-free at power-on 5V-tolerance, stage. Slow slew, FEOSCEN 2, 4, 6, 8mA PDR, 75K pull-up (3,3V) RFIN Differential Input of AC Coupling RF SUM Signal (Negative) Analog Input...
  • Page 69 9-25 Symbol Type Description Analog Output Voltage 3 of Laser Diode Control in APC VWDC3O Output...
  • Page 70 10-1 10-1 Exploded View for BDP2180/12/05:...

  • Page 71: Revision List

    1 1 - 1 Revision List Version 1.0 Initial Release for BDP2180/12/05. Version 1.1 Initial Release for BDP2180X/78.

This manual is also suitable for:

Bdp2112Bdp2105Bdp21x78