Multicast Filtering Mode - D-Link DGS-3200 Series User Manual

Click Apply to implement the changes made. To delete an entry in the Static Multicast Forwarding Table, click the corresponding
Delete button.

Multicast Filtering Mode

Open the L2 Features folder, go to Forwarding & Filtering, and click on the Multicast Filtering Mode link to see the window
below:
Parameter Description
VLAN Name The VLAN to which the specified filtering action applies. Select the All option to apply the action to
all VLANs on the Switch.
This drop-down menu allows you to select the action the Switch will take when it receives a
Filtering Mode
multicast packet that requires forwarding to a port in the specified VLAN.
Click Apply to implement changes made.
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
using GMRP. The options are:
None - No restrictions on the port dynamically joining the multicast group. When None is
chosen, the port will not be a member of the Static Multicast Group.
Egress - The port is a static member of the multicast group.
Figure 7- 35. Multicast Filtering Mode window
Forward Unregistered Groups – This will instruct the Switch to forward a multicast packet
•
whose destination is an unregistered multicast group residing within the range of ports
specified above.
Filter Unregistered Groups – This will instruct the Switch to filter any multicast packets
•
whose destination is an unregistered multicast group residing within the range of ports
specified above.
105