Clock Setting - Philips DVDR600VR/37B Owner's Manual

E9480UD_EN.qx3 05.1.8

30 Clock Setting

Time/Date Automatic
The Recorder can set the time and date automatically by referring to a PBS
station. If the Recorder chooses an incorrect PBS channel or sets the
time/date incorrectly, set the clock manually. See page 31.
Before you begin, make sure TV channels are set. See page 28.
●
Make sure the Recorder is in DVD mode. Press DVD so the DVD light
appears on the front of the Recorder.
1
Press SYSTEM MENU. Press
corner of the menu bar at the top of the TV screen.
2
Press L repeatedly to select
menu screen, then press B to enter the Installation menu.
3
Press L repeatedly to select Time/Date, then press B.
4
Automatic will be selected. Press B.
5
With PBS Channel selected, press
channel number of your PBS station, then press OK.
If you do not know your PBS channel number, choose Auto.The
Recorder will choose a PBS station for you and set the time.
If you want to set the clock manually, choose Off.The Recorder will
not update the time automatically according to a PBS station.
Time/date
Automatic
K
u PBS Channel s 010
L Daylight Saving
Off
Time Zone Auto.
To store
Press OK
6
Press L L to choose Daylight Saving. Press s or B to choose
On, Off, or Auto, then press OK. Choose Auto if you want the
clock set according to the PBS station's Daylight Savings Time schedule.
Time/date
Automatic
K PBS Channel 010
u Daylight Saving s Off
L Time Zone Auto.
To store
Press OK
7
Press L to choose Time Zone. Press s or B repeatedly to
choose your time zone, then press OK.
If you want the Recorder to use the time zone from which your PBS
station broadcasts, choose Auto. But, if your PBS station broadcasts
from a different time zone than the one in which you live, be sure to
select your time zone instead.
Time/date
Automatic
PBS Channel 010
K Daylight Saving Off
u Time Zone s Auto.
L
To store
Press OK
8
Press SYSTEM MENU repeatedly to remove the menus. Press
STANDBY-ON
time will appear on the display panel on the front of the Recorder.
If the Recorder cannot find the time, you may see an error message
when you turn on the Recorder. Check the PBS channel and try again.
Or, set the clock manually. See page 31.
4:16 PM Page 30
s to select
at the end of the second
s or B to choose the
B
B
B
y y to turn off the Recorder. In a few minutes, the
in the top left
STANDBY-ON
8
OPEN/CLOSE
1 2 3
EJECT
TV/VIDEO
4 5 6
7 8 9
VCR Plus +/TIMER MONITOR CHANNEL
0
VCR CLEAR DVD
1,8
DISC SYSTEM
MENU MENU
OK
1-7
SELECT RETURN
PLAY
VCR REC STOP DVD REC
MODE PLAY MODE AUDIO PAUSE
REC
FSS T/C DISPLAY SLOW
VOLUME MUTE MODE
TV SEARCH
Helpful Hints
• The Recorder may set the clock
when you complete Initial
Setup. If the correct time
appears on the display, you do
not need to reset the clock.
• The factory default setting of
Daylight Saving is On.
• The Recorder can use the PBS
channel to set the clock only if
the PBS channel is a
memorized channel.To set up
channels, see page 28.