Different Play Modes; Programming Track Numbers - Philips AZ4000 User Manual

Different play modes: SHUFFLE and
REPEAT
CD MODE allows you to select various
play modes.The modes can be selected or
changed during playback:
– all tracks are played in random
shuffle
order
repeat all
shuffle
MP3-CD/ CD in random order
– plays the current track
a
repeat
continuously
– plays the whole MP3-CD/ CD
all
repeat
continuously
1 During playback, select your play mode by
pressing CD MODE once or more until
the desired play mode is shown (or press
SHUFFLE or REPEAT once on the
remote control).
• Press PLAY/PAUSE 2; to start playback
if you have selected a play mode in the stop
position.
• You can use SEARCH ∞ or § to skip
tracks during the shuffle/repeat modes.
• The shuffle/repeat play options can be
combined and used with a program: e.g.
REPEAT ALL – repeats the entire
program in random order.
2 To return to normal playback press CD
MODE until the various shuffle/repeat
modes are no longer shown.
– repeats the entire
MP3-CD/ CD Playback
• You can also press STOP 9 to quit the
play mode.

Programming track numbers

You may store up to 30 tracks in the
desired sequence. If you like, store any track
more than once.
1 In the stop position, first select your album/
and tracks as follows:
MP3-CD only:
IR SENSOR
• Press PRESET/ ALBUM - or + once or
more to find your album (if available).
• Press SEARCH ∞ or § to select your
track.
• Continue with the following, steps 2-4.
CD:
• Press SEARCH ∞ or § to select your
track.
2 When your chosen track number appears,
press PROGRAM once to store the track.
Display shows program and:
for MP3-CD:
track number;
for CD:
3 Repeat steps 1 and 2 to select and store all
desired tracks in this way.
attempt to program more than 30 tracks.
4 To play your program, press
PLAY/PAUSE 2;.
, the album and
and track number.
is displayed if you
IR SENSOR
17