Engine Cleaning; Car Washing; Window Cleaning, Wiper Blade; Headlamp Cleaning System - Mercedes-Benz 300 SE Owner's Manual

Engine Cleaning

Corrosion protection, such as MB
Anticorrosion Wax should be applied
to the engine compartment after every
engine cleaning. Before applying, all
control linkage bushings should be
lubricated. The poly-V-belt and all
pulleys should be protected from any
wax.

Car Washing

Before washing your vehicle, remove
insect residues. MB Insect Remover is
recommended. Do not use hot water
or wash your car in direct sunlight.
Use only a mild car wash detergent,
such as MB Autoshampoo.
Thoroughly spray the car with a
diffused jet of water. Direct only a very
weak spray towards the ventilation
intake. Use plenty of water and rinse
the sponge and chamois frequently.
94
Rinse with clear water and thoroughly
wipe dry with a chamois. Do not allow
cleaning agents to dry on the finish.
If the vehicle has been run through an
automatic car wash - in particular one
of the older installations - rewipe the
recessed sections in the taillamps
(designed to prevent soiling) if
necessary. No solvents (fuels,
thinners etc.) must be used.
In the winter, thoroughly remove all
traces of road salt as soon as pos­
sible.
When washing the underbody, do not
forget to clean the inner sides of the
wheels.
Tar Stains
Quickly remove tar stains before they
dry and become more difficult to
remove. MB Tar Remover is recom­
mended.
W indow Cleaning, W iper Blade
Use a window cleaning solution on
very dirty or oil-stained windows.
Clean the wiper blade rubber with a
clean cloth and detergent solution.
Replace blade twice a year; once
before and once after winter.

Headlamp Cleaning System

The condition of the wiper blades is
important for satisfactory cleaning of
the headlamp lenses. We therefore
recommend that the blades be
inspected regularly.
Replace damaged wiper blades.