Tar Stains; Paintwork, Painted Body Components; Engine Cleaning; Vehicle Washing - Mercedes-Benz CL Operator's Manual

Instruments
Operation
and controls
Cleaning and care of the vehicle

Tar stains

Quickly remove tar stains before they dry and become
more difficult to remove. A tar remover is
recommended.

Paintwork, painted body components

Mercedes-Benz approved Paint Care should be applied
when water drops on the paint surface do not "bead up",
normally in 3 to 5 months, depending on climate and
washing detergent used.
Mercedes-Benz approved Paint Cleaner should be
applied if paint surface shows signs of dirt embedding
(i.e. loss of gloss).
Do not apply any of these products or wax if your
vehicle is parked in the sun or if the hood is still hot.
Use the appropriate MB-Touch-Up Stick for quick and
provisional repairs of minor paint damage (i.e. chips
from stones, vehicle doors etc.).
Instrument
Driving
cluster display
Practical hints Car care
376

Engine cleaning

Prior to cleaning the engine compartment make sure to
protect electrical components and connectors from the
intrusion of water and cleaning agents.
Corrosion protection, such as MB Anticorrosion Wax
should be applied to the engine compartment after
every engine cleaning. Before applying, all control
linkage bushings and joints should be lubricated. The
poly-V-belt and all pulleys should be protected from any
wax.

Vehicle washing

Do not use hot water or wash your vehicle in direct
sunlight. Use only a mild car wash detergent, such as
Mercedes-Benz approved Car Shampoo.
Thoroughly spray the vehicle with a diffused jet of
water. Direct only a very weak spray towards the
ventilation intake. Use plenty of water and rinse the
sponge and chamois frequently.
Rinse with clear water and thoroughly wipe dry with a
chamois. Do not allow cleaning agents to dry on the
finish.
Technical
Index
data