Philips DVDR7300H/05 User Manual page 76

System Menu Options
System settings
Eco mode
Second RC
OSD
Display
Jump forward
Jump back
Version Info
76
dvdr7300h_eu_eng2.indd 76
(continued)
(underlined options are the factory default settings)
This is an energy saving mode.
{ On } – When you switch the recorder to standby mode,
the display panel will turn blank to save power.
Note: When this mode is active, automatic SAT
(satellite) recording is not possible.
{ Off }
– Clock will display on the recorder's display panel
when switching off to standby mode.
{ On }
– Enables control of this recorder with a second
remote control (not supplied).
{ Off } – Disables second RC control function.
Select the level of On-screen display information.
{ Full }
– Complete information is always displayed during
use.
{ Reduced } – The help text and colour button bar will be
removed from the display.
{ Normal } – The help-text will be removed from the menu.
Select the brightness of the recorder display panel.
{ Bright } – Normal brightness.
{ Dimmed } – Medium brightness.
{ Off }
– Turns off the display.
Set the amount of time you want to skip ahead in tuner mode when you
press the JUMP-FWD button on the remote control, press OK to
confirm the setting. The maximum setting is 60 minutes.
Set the amount of time you want to skip backwards in tuner mode when
you press the JUMP-BACK button on the remote control, press OK to
confirm the setting. The maximum setting is 60 minutes.
This is only an information screen that shows the current version of
firmware installed in your recorder. You may require this information for
future online firmware upgrades.
2005-10-04 4:16:14 PM