Direct Recording From Tv; Automatic Recording From Satellite Receiver - Philips DVDR7300H/05 User Manual

Record to Hard Disk

Direct recording from TV

If you have connected this recorder to
your TV using a scart cable, you can
immediately start recording the
programme which is currently being
shown on the TV while the recorder is in
standby mode.
Ensure that the { Direct rec. } mode in
A
the recording setting is turned on (see
page 35).
While watching the TV programme, press
B

REC
on the remote control to start
recording.
To stop recording, press STOP
C
Otherwise, it will stop automatically

after 6 (six) hours of recording.
Helpful Hint:
– Direct recording is not possible from the
device connected to the EXT2 AUX I/O scart
socket.
TIPS: Set the appropriate recording mode. It determines the actual recordable time to the HDD or a
recordable DVD, see page 35.
38
dvdr7300h_eu_eng2.indd 38
(continued)
Automatic recording from
Satellite Receiver
The feature is only applicable for the
Satellite Receiver (or any similar devices)
that is connected to the EXT2 AUX-I/O
scart socket of this recorder. In addition,
the Satellite Receiver must have a timer
function that is able to control the
recording function of this recorder.
Ensure that the { Sat record } mode in
A
the recording setting is set to { EXT2 }
(see page 35).
Use the Satellite Receiver's timer
B
programming function to programme the

.
recording (refer to the Satellite
Receiver's user manual).
Leave the recorder and Satellite Receiver
C
in standby mode for the recording.
You have to turn off the Satellite

Receiver to standby mode before the
recorder.
The recorder will start recording

when it detects a signal from the Satellite
Receiver.
Helpful Hint:
– The recorder's timer recordings take
precedence over automatic satellite recording.
Automatic Satellite recording will stop if the
recorder's timer recording is due to start.
2005-10-04 4:14:30 PM