Activated Carbon Filter - Bosch DWA061450 Installation Instructions Manual

Filters and maintenance
Removing and inserting the metal grease
filters:
1. Press the catch on the grease filters
inwards and fold the filters down.
2. Clean the filters.
3. Insert the clean filters back into the hood.

Activated carbon filter:

For neutralizing odours in recirculating
mode.
Caution:
As the filter becomes more and more
saturated with grease, there is an increased
risk of fire and the function of the extractor
hood may be impaired.
Important:
Change the activated carbon filter promptly
to prevent the risk of fire from the
accumulation of heat when deep-fat frying or
roasting.
Inserting the filter:
1. Remove the metal filters (see "Removing
and inserting the metal grease filters").
2. Insert an activated carbon filter on the
right and left of the fan motor and rotate
clockwise the central handle of the
charcoal filter.
3. Insert the grease filters (see removal and
installation of the metal-mesh grease
filters).
Removing the filter:
The filters are removed in reverse sequence.
Replacing the activated carbon filters:
❑ During normal operation (1 to 2 hours per
day) the activated carbon filters should be
replaced approximately 1 x year.
❑ The activated carbon filters are available
from specialist outlets (see Optional
accessories).
❑ Use only original filters. The appliance
is then guaranteed to function perfectly.
Disposal of old activated carbon filters:
❑ Activated carbon filters do NOT contain
any harmful substances. They can
therefore be disposed of as householder
fuse.
7
13