Video Output Format; Restore Factory Settings - Philips DVDR3305/02 User Manual

Video Output Format

The colour system of the DVD system,
DVD and TV should match. Only then
will it be possible to play a DVD on this
system. Before changing the TV system,
determine the colour system of your TV.
A
In 'System Menu-General', use
to select { Video Output Format } and
press OK.
{ NTSC }
Select this if the connected TV has the
NTSC colour system. It will change the
video signal of a PAL disc and output it to
NTSC format.
{ PAL }
Select this if the connected TV has the
PAL colour system. It will change the
video signal of an NTSC disc and output
it to PAL format.
B
Use keys to select a setting and
press OK to confi rm.
Helpful Hint:
– If a blank/ distorted TV screen appears,
wait for 15 seconds for the auto recovery.
TIPS: The underlined option is the factory default setting.
Press to go back to previous menu item. Press SYSTEM MENU to exit the menu item.
1_dvdr3305_EU_Eng10.indd 51 1_dvdr3305_EU_Eng10.indd 51
DVD System Menu Options
keys

Restore Factory settings

This will restore all the settings of this
DVD Recorder, except for the PIN code.
Restore Factory settings can only be
changed when there is no disc in the
disc tray.
A
In 'System Menu-General', use
to select { Restore Factory Settings }
and press OK.
A warning message will appear.
B
Select in the menu to proceed or
OK
to abort, then press OK to
CANCEL
confi rm.
(continued)
keys
51
2005-10-31 2:53:39 PM 2005-10-31 2:53:39 PM