Table of Contents
Advertisement
Problem (Playback)
Disc will not play.
The picture is distorted
or black and white
during playback.
There is picture or sound
interference with the
TV reception.
Distorted sound coming
from a connected hi-fi
system or amplifi er.
The message
'UNKNOWN DISC'
appears.
dvdr3440h_05_eng_24282.indd 73
dvdr3440h_05_eng_24282.indd 73
Troubleshooting
Solution
– Insert the disc with the label facing up.
– Wrong region code. The DVD must be coded for ALL
regions or Region 2 in order to play on this recorder.
– There is no recording on the disc or it is not a
supported type of disc. Read chapter "Playback from Disc
- Playable discs" for details.
– Make sure the disc is not scratched or warped. Clean
the disc or replace a new one.
– Check if the disc is defective by trying another disc.
– The disc does not match with the TV colour system
standard (PAL/NTSC).
– The disc is dirty, clean the disc.
– Sometimes a small amount of picture distortion may
appear. This is not a malfunction.
– Have your aerial or cable TV signal checked.
– Fine-tune your TV channel. Read chapter "Step 3:
Installation and Setup - Setting your TV channel
programmes" for details.
– Do not connect any cables from the recorder to the
'Phono' input of your amplifi er.
– If you are playing a DTS CD, you have to connect the
COAXIAL socket of this recorder to a Hi-Fi system or
amplifi er.
– This message may appear if you insert a disc that may
have encountered one of the following:
– Error during recording: The title may be missing.
– Error while changing the title/index picture. The
original title/index picture may be visible.
– Error while fi nalising or the disc has not been
fi nalised.
(continued)
73
2007-05-28 5:20:04 PM
2007-05-28 5:20:04 PM
Advertisement
Table of Contents
