Recording From Camcorder - Philips DVDR7260H/05B User Manual

Record to Hard Disk or recordable DVD

Recording from camcorder

When you connect the camcorder to the
VIDEO or S-VIDEO socket at the front
panel of this recorder or the EXT1 or
EXT2 socket at the back panel, follow the
steps below to make the camcorder
recording.
Before you start...
Mark the contents in the temporary
HDD storage (time shift buffer) for which
you wish to record to the HDD, see page
36. Otherwise, all the contents will be
cleared when you start camcorder
recording.
TUNER
A
Connect the camcorder to this recorder
(see page 25).
B
Find the place on the camcorder that you
want to start recording from and set the
camcorder to pause mode.
C
Turn on the TV to the correct
programme number for the recorder
(e.g. 'EXT', '0', 'AV').
D
Turn on the recorder and press CAM
on the remote control.
Media type selection screen appears.
TIPS: Setting an appropriate recording mode is important as it determines the picture quality and
recording time to the HDD or a recordable DVD, see page 38.
48
E
To continue, select to record to { Hard
Disk } or { Recordable DVD } in the
menu and press OK to confi rm.
All the contents in the temporary
HDD storage will be cleared except for
the 'marked' recordings.
Otherwise, select { Cancel } in the menu
and press OK to abort the operation.
Press CHANNEL +/- repeatedly to
F
select the correct input channel that
matches the connected socket of the
device.
{ CAM 1 } : S-VIDEO or VIDEO
socket at the front.
{ EXT 1 } : EXT1 TO TV-I/O scart
socket at the back.
{ EXT 2 } : EXT2 AUX-I/O scart
socket at the back.
G
Press REC to start recording and
press PLAY button on the camcorder to
start playback.
To pause the recording, press PAUSE Å .
To continue recording, press PAUSE Å
again.
A new chapter marker is created after
recording restarts (for recordable DVD
only).
H
To stop the recording, press STOP
A new title will be created when you
begin another recording.
I
To exit, press TUNER.
(continued)
.