Using The Remote Control - Philips DVDR7260H/05B User Manual

Remote Control

Using the remote control

3
1
2
A
Open the battery compartment.
B
Insert two batteries type R06 or AA,
following the indications (+-) inside
the compartment.
C
Close the cover.
D
Point the remote control directly at the
remote sensor (iR) on the front panel.
E
Select the source you wish to control by
pressing TUNER or DISC MENU
button
F
Select the desired function (for example
. / >).
14
(continued)
CAUTION!
– Remove batteries if they are
exhausted or if the remote control
is not to be used for a long time.
– Do not mix batteries (old and new
or carbon and alkaline, etc.).
– Batteries contain chemical
substances, so they should be
disposed of properly.
Using the alphanumeric keypad to
enter the characters
– Press a number button repeatedly until
the required character or the number
appears.
– To enter language-dependent
characters, press . or > on the
corresponding character, e.g.,: 'å' press
button {2} for 'a' and then press >
until 'å' appears.
– To enter special symbols, press button
{1} repeatedly.
– To select upper/lower case (capital/
small) letters, press a/A.
– To enter a space, press button {1}.