Screen Saver - Turning On/Off; Setting The Digital Output - Philips MX2500/01 User Manual

DVD Setup Menu Options
Screen Saver – turning on / off
The screen saver will help to prevent your TV
display device from becoming damaged.
Follow the steps of "Using the Setup Menu"
and select :
TV SHAPE
TV SYSTEM
VIDOT OUT
SCR SAVER
SCREEN SAVER SETTING
ON
Select this if you wish to turn off the TV screen
when play is stopped or paused for more than
five (5) minutes.
OFF
Select this to disable the screen saver function.
To return to the previous menu, press 1.
TIPS:
To remove the menu, press SYSTEM MENU.
24
001-035-MX2500-00-Eng
> S
CR SAVER
OFF
ON
24

Setting the digital output

Set Digital Output according to the optional
audio equipment you connected.
Follow the steps of "Using the Setup Menu"
and select :
>
D
IGITAL
DIGITAL OUT
NIGHT MODE
CNTR DELAY
REAR DELAY
TEST TONE
SELECT AUDIO OUTPUT
ALL
Select this if you have connected the digital
output to an optional piece of audio
equipment that has a multichannel decoder.
PCM 96 kHz
Select this if the optional audio equipment is
capable of processing digital signal input with
sampling rates of 96 kHz. However, if the
sound output is distorted or there is no sound,
select '48 kHz' instead.
PCM 48 kHz
Select this if the optional audio equipment is
incapable of processing 96 kHz digital signal
input. The signal will then be converted to a
standard signal with sampling rates of 48 kHz.
OFF
Select this to deactivate the digital output.
Helpful Hint:
– Analogue signal will also be available through
the digital output.
9/16/04, 10:48
O
UT
ALL
PCM 96K
PCM 48K
OFF