Connections (Optional); Connecting A Vcr Or Cable /Satellite Box; Viewing And Listening To The Playback; Using The Vcr For Recording Dvd - Philips MX2500/01 User Manual

Connections (optional)

Connecting a VCR or
Cable /Satellite Box
S-VIDEO
AUDIO IN
OUT
VIDEO IN
Viewing and listening to the

playback

1
Connect the VCR or Cable / Satellite Box to
the TV as shown.
2
Connect the DVD system's AUDIO IN-AUX
jacks to the AUDIO OUT jacks on the VCR or
cable/satellite box.
Before starting operation, press AUX on the
remote to select "AUX" in order to activate
the input source.
10
001-035-MX2500-00-Eng
SCART IN
1
FRONT FRONT FRONT REAR REAR SUBWOOFER
RIGHT LEFT CENTER RIGHT LEFT
10
VCR or Cable/ ~ AC MAINS
Satellite Box
SCART OUT
2 4 3

Using the VCR for recording DVD

playback
3
Connect the DVD system's S-VIDEO OUT
jack to the S-VIDEO IN jack on the VCR.
4
Connect the DVD system's LINE OUT jacks to
the AUDIO IN jacks on the VCR. This will allow
you to make analogue stereo (two channel, right
and left) recordings.
To view DVD playback while recording,
you must connect the DVD system to your TV
using SCART (as shown above) connection.
9/16/04, 10:45