Step 6: Connecting Tv; Using Composite Video Jack (Cvbs); Using Component Video Jacks (Pr Pb Y) - Philips MX5600D/99 Quick Use Manual

Connections
Step 6: Connecting TV
COMPONENT
VIDEO IN
S-VIDEO
IN Pr/Cr
AUDIO
OUT
Pb/Cb
VIDEO IN
Y
L
R
C
DIGITAL AUX
SL OUT
IN
L
SR
R
DIGITAL
IN
IMPORTANT!
– You only need to make one video
connection from the following options,
depending on the capabilities of your TV
system.
– S-Video or Component Video
connection provides higher picture
quality. These options must be available
on your TV.
– Connect the DVD system directly to
the TV.

Using Composite Video jack (CVBS)

1
Use the composite video cable (yellow) to
connect the DVD system's CVBS jack to the
video input jack (or labeled as A/V In, Video In,
Composite or Baseband) on the TV.
2
To hear the TV channels through this DVD
system, use the audio cables (white/red) to
connect TV IN (L/R) jacks to the
corresponding AUDIO OUT jacks on the TV.
3
Set the P-SCAN switch to 'OFF. '
14
COMPONENT
VIDEO IN
S-VIDEO
IN
Pr/Cr
AUDIO
OUT
Pb/Cb
VIDEO IN
Y
AM
FM ANTENNA
1
AUDIO VIDEO
OUT
TV LINE
CVBS
IN OUT
Pb
P-SCAN
ON OFF
Y
S-VIDEO
2 3
COMPONENT
VIDEO IN
S-VIDEO
IN
AUDIO Pr/Cr
OUT
Pb/Cb
VIDEO IN
Y
L
R
C
DIGITAL AUX
SL OUT
IN
L
SR
R
DIGITAL
IN
IMPORTANT!
– If both S-Video and Component
(Pr Pb Y) Video connections are used to
connect to your TV, the video signal will
automatically switch to S-Video when
you power up the DVD system. To set
the VIDEO OUT(put) to 'Pr Pb Y,' see
page 32.
– The progressive scan video quality is
only possible through Component Video
(Pr Pb Y) output.
Using Component Video jacks
(Pr Pb Y)
1
Use the component video cables (red/blue/
green) to connect the DVD system's Pr Pb Y
jacks to the corresponding Component video
input jacks (or labeled as Pr/Cr Pb/Cb Y or YUV)
on the TV.
2
To hear the TV channels through this DVD
system, use the audio cables (white/red) to
connect TV IN (L/R) jacks to the
corresponding AUDIO OUT jacks on the TV.
3
If you are using a Progressive Scan TV (TV must
indicate Progressive Scan or ProScan capability,)
set the P-SCAN switch to 'ON. ' Otherwise,
set it to 'OFF. '
COMPONENT
VIDEO IN
S-VIDEO
IN
Pr/Cr
AUDIO
OUT
Pb/Cb
VIDEO IN
Y
1
AM
FM ANTENNA
AUDIO VIDEO
OUT
TV LINE
Pr
IN OUT CVBS
Pb
P-SCAN
ON OFF
Y
S-VIDEO
3
2