Advanced Features; Editing The Name Of The Recording; Erasing An Entire Recording/Title - Philips LX9000R/25S User Manual

Advanced features

Editing the name of the recording

After the recording has been made, you can change the
name of the recording.
1
Press STOPÇ when playback is stopped or press
DISC MENU on the remote control during playback.
Press 4 or 3 on the remote control as often as necessary
2
to select the desired title for editing.
Press 2 on the remote control to confirm the selection.
3
The editing menu appears.
Press 4 or 3 on the remote control as often as necessary
4
to select the line Name.
Settings for title Philips 1
2
Name
4
Play full title
Erase this title
Press 2 on the remote control to confirm the selection.
5
Use 1 or 2 on the remote control to move to the
6
character to be deleted or substituted.
The character is highlighted.
Use 4 or 3 on the remote control to select a new
7
character, symbol or number.
To switch between upper and lower case press SELECT on
0 0
the remote control.
To delete a character press CLEAR on the remote control.
0 0
8
Repeat steps 6–7 until the name of the recording is
changed as desired.
9
Press OK on the remote control to confirm the new name.
Storing name is displayed.
Press 1 on the remote control to exit the editing menu.
10
48
2
Philips 1

Erasing an entire recording/title

You can erase an entire recording/title from a DVD+RW or
an unfinalised DVD+R.The position of a deleted title on a
DVD+RW can be used for a new recording. However, a
deleted title on a DVD+R is only marked as deleted, but
not physically deleted.This means the deleted title will be
skipped during playback, but no new recording can be
made. Once the DVD+R has been finalised no further
changes can be made.
7
DISC
SYSTEM
É
VOL
-
TV VOL
∞
REC MODE
TIMER
SUBWOOFER
REAR
1
Press STOPÇ when playback is stopped or press
DISC MENU on the remote control during playback.
Press 4 or 3 on the remote control as often as necessary
2
to select the desired title for erasing.
Press 2 on the remote control to confirm the selection.
3
The editing menu appears.
Press 4 or 3 on the remote control as often as necessary
4
to select the line Erase this title.
5
Press OK on the remote control to confirm.
This will completely erase this title and Press
OK to confirm is displayed.
6
Press OK again on the remote control to erase the entire
recording/title.
Erasing title is displayed.
Afterwards Empty title (if you inserted a DVD+RW)
or Deleted title (if you inserted a DVD+R) is displayed
in the index picture screen.
Note: If the deleted title was shorter than 1 minute Empty
title or Deleted title will not be displayed.
To exit the editing menu without erasing press 1 on the
0 0
remote control.
8 9
MENU
SELECT
0
AUDIO
OK
É
H
CH
MUTE
+
§
9
2 ;
PLAY MODE DISC DISPLAY
T/C
EDIT CLEAR RETURN
SURR. SURR.
TREBLE LOUDNESS
BASS VOICE
NIGHT