Frequency Test; G3 Signal Transmission Test - Canon PC1000s Service Manual

CHAPTER 2 USING THE MACHINE
3.20.6.2 Frequency Test
A
press on '2' on the keypad from the MODEM NCU Test menu selects the frequency test.
In this test, signals of the following frequencies from the modem are transmitted using the tele-
phone line terminal and the speaker. To select a different frequency, use the keypad.
Keypad
1
2
3
4
5
6
7
Frequency
462 Hz
l
I00 Hz
1300 Hz
1500 Hz
1650 Hz
1850 Hz
2100 Hz
The frequency and the output level of individual frequencies are in keeping
with the output level set in service mode.
Memo
3.20.6.3 G3 Signal Transmission Test
A press on '4' on the keypad from the MODEM NCU Test menu selects the G3 signal
transmission test. In this test, the following G3 signals from the modem are transmitted using
the telephone line terminal and the speaker. To select a different transmission speed, use the
keypad.
Kemad Transmission meed
300 bps
2400 bps
4800 bps
7200 bps
9600 bps
TC7200 bps
TC9600 bps
12000 bps
14400 bps
The output level of individual signals is in keeping with the setting made in
service mode.
Memo
2-70
COPYRlGHTQ2002CANON INC.
CANON PC1000slimageCLASS DGWs REV. 1 AUG.2002