Table of Contents
Advertisement
Connect USB device
1
Connect the USB device to
on this Home Theater System.
Note
•
This Home Theater System can only play/view
MP3, WMA, DivX (Ultra) or JPEG À les that are
stored on such devices.
•
Press
USB to access the content and play the
À les.
Connect power cord
Warning
•
Risk of product damage! Ensure that the
power supply voltage corresponds to the
voltage printed on the back or the underside
of the Home Theater System.
1
Connect the power cord to the power
outlet when all the required connections
are done.
»
The Home Theater System is ready to
be set up for use.
Mount the Home Theater
System
•
Risk of personal injury and damage to the
product. Allow only qualiÀ ed persons to
mount the product.
1
Ensure all the required cables are
connected to this Home Theater System
and close the rear cover.
USB jack
2
Attach the supplied knobs to the rear of
this Home Theater System.
3
Turn this Home Theater System over so
that its bottom faces up.
4
Remove the rubber feet by pushing it
towards the back of this Home Theater
System. Repeat the step to remove the
other rubber feet.
Caution
EN
17
Hide quick links:
Advertisement
Table of Contents
