Step 4: Connecting Fm/Mw Antennas; Step 5: Connecting The Power Cord - Philips LX3950W/05 Quick Start Manual

Step 4: Connecting FM/MW
antennas
fix the claw
into the
slot
CVBS
L
S-VIDEO
SCART
1
Connect the supplied MW loop antenna
to the MW jack. Place the MW loop
antenna on a shelf or attach it to a stand
or wall.
2
Connect the supplied FM antenna to the
FM jack. Extend the FM antenna and fix
its ends to the wall.
For better FM stereo reception, connect
an external FM antenna (not supplied).
Helpful Hints:
– Adjust the position of the antennas for
optimal reception.
– Position the antennas as far as possible
from your TV, VCR or other radiation source
to prevent unwanted interference.
001-041-LX39-22-Eng2
Step 5: Connecting the
MW
FM
antenna
antenna
1
2
FM/MW ANTENNA
FM 75
MW
After everything is connected
properly, plug the AC power cord
into the power outlet.
Never make or change any connections
with the power switched on.
Helpful Hint:
– Refer to the type plate on the rear or
bottom of the system for identification and
supply ratings.
11
Connections
power cord
L L
R R
S-VIDEO
IN
AUDIO
~ AC MAINS
OUT SCART IN
VIDEO IN
3139 115 22872
3/15/04, 6:09 PM
11