Video Setup - Philips HTS6120/37 User Manual

Video setup

TV System
TV Display
Picture Setting
HDMI Setup
Closed Caption
Progressive
1
Press SETUP .
» [General Setup] menu is displayed.
2
Press to select [Video Setup] , then
press .
3
Select an option, then press OK
4
Select a setting, then press OK .
• To return to the previous menu,
press BACK .
• To exit the menu, press
Note
•
See the explanations of the above options in
the following pages.
[TV System]
Change this setting if the video does not
appear correctly. By default, this setting
matches the most common setting for TVs in
your country.
• [NTSC] – For NTSC-system TV.
• [Multi] – For TV that is compatible with
both PAL and NTSC.
40 EN
[TV Display]
Selects one of the following display formats:
•
•
•
[Picture Setting]
Selects a predeÀ ned set of picture color
settings or customize the personal setting.
•
•
•
•
SETUP .
[HDMI Setup]
Selects the HDMI video setting when you
connect this Home Theater System and the
TV with a HDMI cable.
•
Option
[Superwide] Center position of the screen
[4:3 Pillar
Box]
[Off]
4:3 Pan Scan (PS)
4:3 Letter Box (LB)
[4:3 Pan Scan] – For 4:3 screen TV: full-
height display with the trimmed sides.
[4:3 Letter Box] – For 4:3 screen TV:
wide-screen display with black bars on
the top and bottom of the screen.
[16:9 Wide Screen] – For wide-screen
TV: display ratio 16:9.
[Standard] – Original color setting.
[Bright] – Vibrant color setting.
[Soft] – Warm color setting.
[Personal] – Customizes the color setting.
Set the level of brightness, contrast,
sharpness/tint and color saturation, then
press OK .
[Wide Screen Format] – DeÀ nes wide
screen format for disc play.
Description
is stretched less than the side.
Applicable only to 720p and
above video resolution setting.
No stretching of picture. Black
bars are displayed on both
sides of the screen.
Picture is displayed according to
the disc format.
16:9 (Wide Screen)