Zero Feed - Singer Inspiration 4228 Service Manual

Setting

Zero feed

Check
1. Remove the needle.
2. Set the stitch lenght selector at "0" and the pattern selector at
straight stitch.
3. Place 2 layers of light fabric under the presser foot and lower it.
4. Run the machine at maximum speed.
5. The fabric should not move in any direction under the presser foot.
Adjustment
1.Loosen the nut (a) and turn the screw (b) clockwise or counter clockwise until the feeding of
the fabric stops.
2.Tighten the nut (a).
3. Re-check
Singer Inspiration 27