Invacare Aquatec Ocean Series Service Manual page 20

Aquatec® Ocean/Ocean Ergo family
1. If the release mechanism A has to be replaced: Screw
on new release mechanism again (release 2 threads or
1.5 - 2 mm distance between the release mechanism
and thread start of piston rod F).
2. Refit bolts D and circlips C to lower fixations G and
if necessary upper fixations H if the whole gas spring
was replaced.
If necessary, push the backrest slightly forwards
to make it easier to insert the bolt.
3. Tighten the nut B on the release mechanism.
20 1640651-B