The Channel Control - Philips 34PW850H Directions For Use Manual

S
ETTING THE
Y ou can select a specific channel that the
television will tune to when the timer
turns the set ON. Follow these steps to select
the channel.
1
Press the MENU button on the
remote control to show the onscreen
menu.
2
Press the CURSOR DOWN button
twice to highlight FEATURES.
3
Press the CURSOR RIGHT button and
the menu will shift to the left. TIMER will
be highlighted.
4
With TIMER selected, press the CUR-
SOR RIGHT button again to shift the
display left.
5
Press the CURSOR DOWN button
to highlight the CHANNEL Control.
6
Press the NUMBERED buttons to
enter the desired start-up channel. Or,
press the CURSOR RIGHT or CUR-
SOR LEFT button repeatedly to enter
the start-up channel you want.
NOTE: The ACTIVATE Control (page 25)
must be set to ONCE or DAILY for this
Channel Control to take effect.
7
Press the STATUS/EXIT button to
remove the menu from the screen.
H
ELPFUL
The ACTIVATE Control must be set to
ONCE or DAILY for the television to tune
itself to a specific channel at the specified
time. See page 25 for more details about the
ACTIVATE Control.
TV
H
INT
S
TO TARTUP ON A
PICTURE TIMER
SOUND ACTIVE CTRL
FEATURES AutoLock
INSTALL CLOSED CAP
FORMAT
6
1
6
2
5
24
S C
PECIFIC HANNEL
FEATURES
TIMER
ACTIVE CTRL
AutoLock
CLOSED CAP
FORMAT
FEATURES
FEATURES
TIMER
TIME
START TIME
STOP TIME
CHANNEL
ACTIVATE
7
FEATURES
FEATURES
TIMER
TIME
START TIME
STOP TIME
CHANNEL
3
ACTIVATE
4
6
TIME
START TIME
STOP TIME
CHANNEL
ACTIVATE
_ _:_ _
12