Philips 37PF9631D/37B User Manual page 52

Software Upgrade Application
Upgrade busy...
Software Id: TL32E-234
Loading
Validating
Programming
Settings
Installation
Software upgrade
Current softw. info
Language
Local upgrades
Autoprogram
Weak channel inst.
Software upgrade
Info
50
Annex 1 (Continued)
Automatic software upgrade procedure
1. Switch off your TV and remove all memory devices.
2. Insert the USB portable memory that contains the
downloaded software upgrade.
3. Switch on your TV with the
remote control.
4. At startup the TV will scan the USB portable memory until
it finds the update content.The TV will automatically go to
the upgrade mode. After a few seconds it will display the
status of the upgrade procedure.
Done
Warning:
Done - you are not allowed to remove the USB portable
memory during the software upgrade procedure;
- in case of a power drop during the upgrade procedure,
don't remove the USB portable memory from the TV.
The TV will continue the upgrade as soon as the power
comes back;
- if an error occurs during the upgrade you should retry
the procedure or contact your dealer.
5. When the software upgrade was successful, remove the USB
portable memory and restart your TV with the
B button on your remote control.
Your TV will start up with the new software.
Note: once the upgrade is finished use your PC to
remove the TV software from your USB portable memory.
Manual software upgrade procedure
For a manual software upgrade copy the "autorun.upg" file
in a directory called "Upgrades" located in the root of the
USB portable memory.
1. Insert the portable memory that contains the downloaded
software upgrade.
2. Select Software Upgrade in the Installation menu. Go to
Local upgrades.
The TV will list all compatible software available on the USB
portable memory and display the data for each selected
upgrade version.
3. Select the correct upgrade version and press the red color
button to start the upgrade.
Your TV will restart and will automatically go to the upgrade
mode. After a few seconds it will display the status of the
upgrade procedure.
Warning: if you try to upgrade to a software version
equal or lower than the current version, a confirmation
will be asked. Downgrading to older software should only
be done in case of real necessity.
4. When the software upgrade was successful, remove the USB
portable memory and restart your TV with the
B button on your remote control.Your TV will start up
with the new software.
B button on your
POWER
POWER
POWER