To Make Video And Audio Connections - Philips 37PF9631D/37B User Manual

To make video and audio connections

Tips:
- use the inputs that are available on your equipment that provide the best video or audio
performance, as below;
- if necessary, you can adjust the picture position to the centre of the screen with the cursor buttons.
Note:
- your TV comes with all types of connectors with the exception of the DVI connector but some of
your equipment may be equipped with this type. In this case you'll need a DVI to HDMI adapter or
a HDMI to DVI cable and separate audio cables, all available at your local dealer.
- be sure to connect the DVI output connector first, then connect to the HDMI input on your TV.
AV1 / AV2
Pr Pb
AUDIO
L R
AV3
L
S-VIDEO
R
AV3
L
S-VIDEO
R
AV1 / AV2
Pr Pb
AUDIO
L R
ANTENNA
75
Warnings: in case you notice scrolling images, wrong colors or no color, no picture, or even
combinations of these on your screen, verify if the connections are done in the correct way or move
your digital device further away from your TV and if the resolution and the signal standard of the
connected equipment are set in the right way. See the handbook for your equipment.
Connector table
HDMI
HDMI
(High-Definition
Multimedia
Interface)
Component video
Y
(480p/720p/
VIDEO
480i/576i/1080i)
S-Video
VIDEO
Video
VIDEO
Y
VIDEO
RF/Coaxial
Audio connection
required
No
AV1 / AV2
Yes
Pr Pb Y
AUDIO VIDEO
L R
AV3
L
Yes
S-VIDEO
R
VIDEO
AV3
L
Yes
S-VIDEO
R
VIDEO
AV1 / AV2
Pr Pb Y
AUDIO VIDEO
L R
No
35