Rf Output - Philips 37PF9631D/37B User Manual

Connect a recorder and Cable box with RF output
CABLE
SIGNAL
SPLITTER
1
1. Use an optional signal splitter.
2. Connect one of the cable TV signal splitter outputs 1 to the cable box's
3. Connect the other cable TV signal splitter output 2 to the
the bottom of the TV.
4. Connect the cable box's
5. Connect the Video, Audio Left and Right (only for stereo sound) recorder AV cables 4 to the
,
VIDEO AUDIO L
6. Select the equipment you have connected in the Setup menu, Select your source, p. 20 and link
it to the connector you have connected your equipment to.
AV
Notes:
- cables are often color-coded to connectors. Connect red to red, white to white....
- if your recorder has an S-VHS video jack:
For improved picture quality, connect an S-video cable with the
the audio cables to the
When using the
S-VIDEO
- in case of mono equipment, only the left loudspeaker reproduces sound.
Use a mono to stereo adapter (not supplied) for sound reproduction via all internal loudspeakers.
40
AV3
L
S-VIDEO
R
ANTENNA
75
2
IN OUT
Cable Box
jack 3 to the recorders
OUT
and input or
R AV1, AV2
and input jacks of
AUDIO L R
connector do not connect any device to the
DIGITAL AV2 AV1
AUDIO OUT
Pr Pb Y
AUDIO VIDEO
L R
VIDEO
AV1 / AV2 / AV3 :
L + R + VIDEO
4
3
IN OUT
RECORDER
CABLE/ANTENNA 75 Ω
socket.
RF IN
jacks on the TV.
AV3
S-VIDEO
AV3.
Pr Pb Y
AUDIO VIDEO
L R
jack.
IN
x plug on
input of and connect
AV3
jack;
AV3 VIDEO