Get Connected - Zte Warp Connect Manual

2. Get Ready
a. Make sure you are in an area covered by the Sprint Mobile network (not roaming). Check your
location on the Sprint coverage map:
b. Make sure the computing device you are trying to connect to your SFL mobile hotspot has its
Wi-Fi (wireless network connection) mode turned on.
3. Power Up Your Hotspot
a. Press and hold the Power key on the side of the device to turn it on.
i. The device will automatically activate
Note: It can take several minutes for your device to connect to the Sprint network.
b. When the hotspot is powered on, the following icons may be displayed on the LCD screen.

Get Connected

1. Access Your Wi-Fi Name and Password
The default Wi-Fi name and password (key) can be found on the SFL mobile hotspot display, and on a
sticker on the back of the device.
a. To access your Wi-Fi name and password on the display, press the function key, on the bottom
of the device.
b. Press the function key again, to highlight the Device Info option, and then press the power key
to select the option (the Function key is used to navigate up and down through the options, and
the power key is used to select options):
2. Connect to Your SFL Mobile Hotspot
With your Wi-Fi name and password (key) ready, you can now connect your WiFi enabled computing
device(s) to the SFL mobile hotspot.
a. Open the Wi-Fi application or controls on the computer or Wi-Fi enabled computing device that
you want to connect to the SFL mobile hotspot and find the Wi-Fi name.
b. When prompted, enter your Wi-Fi password (key), which is also located on the sticker on the
back of the hotspot.
c. Your Wi-Fi enabled device is now connected to the internet.
Once connected, you are ready to access the internet!
REV 6-29-2017
http://coverage.sprint.com/IMPACT.jsp
Page 2 of 3