Jumpers And Connectors - Supermicro X11SRA Quick Reference Manual

P c
ackage ontents
• One (1) Supermicro Motherboard
• Six (6) SATA Cables
• One (1) Quick Reference

Jumpers and Connectors

Jumper
JBT1 CMOS Clear
JPAC1 Audio Enable
JPG1 VGA Enable
JPME2 Manufacturing Mode Select
Connector
AUDIO_FP1
BT1
COM1
FAN1 ~ FAN4, FANA
HD AUDIO
I-SATA2/3, I-SATA4/5, I-SATA6/7
I-SGPIO 1/2
J12
J13
JD1
JF1
JIPMB1
JL1
JNVME1
JNVI2C1
JPI2C1
JPWR1
JPWR2
JRK1
JSD1
JSTBY1
JTPM1
LAN1/LAN2
MH10 ~ MH13
SLOT1
SLOT2
SLOT4, SLOT6
SP1
USB 0/1
USB 2/3, USB 4/5
USB 6/7, USB 8/9
USB 10/11
USB 12/13
VGA
• One (1) I/O Shield
• One (1) Driver CD
Jumpers
Description
Connectors
Front Panel Audio Header
Onboard Battery
COM Header
System/CPU Fan Headers
High Definition Audio Header
SATA 3.0 Connectors
Serial Link General Purpose I/O Headers
M.2 PCI-E 3.0 x4 Slot
M.2 PCI-E 3.0 x4 Slot
Speaker/Power LED Indicator (Pins 1-3: Power LED, Pins 4-7: Speaker)
Front Control Panel Header
System Management Bus Header (for IPMI only)
Chassis Intrusion Header
NVMe Connector (supports two connections)
NVMe I2C Header
Power I2C System Management Bus (Power SMB) Header (X11SRA-F/-RF
only)
+12V 8-pin CPU Power Connector (Required)
24-pin ATX Main Power Connector (Required)
Intel® RAID Key Header
SATA Disk On Module (DOM) Power Connector
Standby Power Header
Trusted Platform Module (TPM)/Port 80 Connector
LAN1: 5 Gigabit (RJ45) LAN Port, LAN2: 1 Gigabit (RJ45) LAN Port
M.2 Holding Screws
PCI-E 3.0 x4 PCH Slot
PCI-E 3.0 x8 (IN x16) CPU Slot
PCI-E 3.0 x16 CPU Slots
Internal Speaker/Buzzer
Back Panel USB 2.0 Ports
Front Accessible USB 2.0 Headers
Back Panel USB 3.0 Ports
Front Accessible USB 3.0 Type A Header
Back Panel USB 3.1 Ports
Back Panel VGA Port
Default
Open: Normal, Closed; Clear CMOS
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Normal)
Description