If The Link-Local Address Is Not Accessible - QTS AN-X2-ABDHRIO User Manual

Example:
IP: 192.168.1.12
Anything after a semicolon on a line is treated as a comment.
Keyword
IP
Netmask
DefGtwy
Hostname
Firmware
If you edit the file and AN-X2 finds an error during startup, it flashes an error code on the
SYS LED, see page 33.
Example config.txt files
Example: Link- Local IP address
IP: LOCAL
Hostname: ANX2Hmi
Firmware: AN-X2-AB-HMI
Example: DHCP
IP: DHCP
Hostname: ANX2Hmi
Firmware: AN-X2-AB-HMI
Example: static IP address
IP: 192.168.1.14
NetMask: 255.255.255.0
DefGtwy: 192.168.1.1
HostName: ANX2Hmi
Firmware: AN-X2-AB-HMI

If the link-local address is not accessible...

Addresses 169.254.1.0 to 169.254.254.255 are reserved for use on a local network. AN-
X2 modules are shipped set to the address 169.254.42.84 for initial configuration. This
AN-X2-ABDHRIO Remote I/O HMI Interface Page
Possible Values
LOCAL
DHCP
static IP address
Ethernet netmask, used only if IP is a static IP address
default gateway, used only if IP is a static IP address
Ethernet host name, from 1 to 30 characters
Firmware file to run at startup, must be present on microSD
card
13