Getting Started; Stand Installation; Connecting To Antenna For; Charging The Tv Set - Philips PVD1075/12 User Manual

Philips portable tv pvd1075 25.9 cm (10.2") widescreen lcd

Hide thumbs Also See for PVD1075/12:

Table of Contents

3 Getting started

Use the stand to place the TV set on a ﬂ at surface. To install the stand,

align the catches on the stand base with the slots at the bottom of the

set, as shown in the ﬁ gure below. Then ﬁ t the stand into the slots and

turn anticlockwise until you hear a "click" sound.

Note: When you install the TV on the wall (refer to the Wall Mounting

section), please release the stand. To release the stand, lift up the latch and

turn the stand clockwise.

3.2 Connecting to antenna for either home

antenna or auxiliary antenna

Insert the aerial plug ﬁ rmly into the 75 Ω aerial socket on the right side

of the TV and in the wall antenna socket.

Plug in the AC/DC adaptor.

Table of Contents

Pvd1075