Switching On The Tv; Using The Remote Control - Philips PVD1075/12 User Manual

• The RED LED indicates that charging is in progress.
When the set is not in use, it will take about 6 hours to fully charge it.
However, when in use, it will take more than 8 hours to fully charge it.*
• The RED LED will turn off when the set is fully charged. When the
low battery icon appears on the screen, please charge the set.
* Rechargeable batteries have a limited number of charge cycles and may
eventually need to be replaced. Battery life and number of charge cycles
vary by use and settings.

3.4 Switching on the TV

To switch on the TV, press and hold the POWER key on the top of the
set and the GREEN indictor also comes on.
Notes:
1. For the fi rst time to power on the set, use the AC power adaptor.
2. In case of failure to power on the set with built-in batteries, use the AC
power adaptor to charge batteries.

3.5 Using the Remote Control

1 Open the battery compartment. Remove the protective
plastic tab (fi rst time users only).