What You Need - Philips 46PFL5507T/12 User Manual

Maximise display for subtitled video
Some video subtitles can create a separate
subtitle bar under the video, which limits the
video display area. To maximise the video
display area, you can switch on auto subtitle
shift and display the subtitles on top of the
video image.
Listen to another device when TV is in
standby
You can listen to a connected HDMI-CEC
compliant device through the TV speakers,
even when the TV is in standby.

What you need


Connect at least two HDMI-CEC
compliant devices through HDMI. See
Connect your TV > About cables >
HDMI (Page 44).

Configure each HDMI-CEC compliant
device properly

Switch on EasyLink
Switch on EasyLink
1. Press .
2. Select [Setup] > [TV settings] >
[EasyLink].
3. Select [On] or [Off], then press OK.
Control devices simultaneously
If you connect multiple HDMI-CEC devices
that support this setting, you can control all
such devices through the TV remote control.
Note: This is an advanced setting. Devices
that do not support this setting will not
respond to the TV remote control.
1. Press .
2. Select [Setup] > [TV settings] >
[EasyLink].
3. Select [EasyLink Remote Control] >
[On] or [Off].
4. Press OK to activate.
Tips:

To switch back to TV control, press ,
then select [Watch TV].

To control another device, press ,
then select the device from the Home
menu.

To exit, press
EN 32
.
EasyLink buttons
You can control HDMI-CEC compliant
devices with the following buttons on the TV
remote control:

: Switch the TV and the connected
device on or to standby.

Play buttons: Control video or music
play.

Numeric buttons: Select a title, chapter
or track.

OK: Start, pause or resume play on the
connected device, activate a selection,
or access the device menu.

/ : Search backwards and
forwards on the connected device.

: Display the TV Home menu.
You can also control devices through other
EasyLink buttons that are available through
the On-Screen Remote Control (OSRC).
To access the OSRC
1. While you view content from a connected
device, press OPTIONS.
2. Select [Show device keys], then press
OK.
3. Select an onscreen button, then press OK.
4. Press to exit.
Select speaker output
If a connected device is HDMI CEC
compliant, you can output TV audio through
an HDMI cable. Additional audio cables are
not required. Make sure that you connect
the device to the HDMI connector on the
TV. See Connect your TV > About cables
> HDMI (Page 44).
Configure TV speakers
1. Press .
2. Select [Setup] > [TV settings] >
[EasyLink] > [TV speakers].
3. Select an option, then press OK:

[Off]: Switch off TV speakers.

[On]: Switch on TV speakers.

[EasyLink]: Stream TV audio through
the connected HDMI-CEC device.
Switch the TV audio to the connected
HDMI-CEC audio device through the
Adjust menu.