Philips 37PFL8694H/12 User Manual page 56

Check that the antenna is properly
connected to the TV.
Check that the correct device is selected
as the TV source.
Check that the picture settings are
correctly set.
Check that the antenna is properly
connected to the TV.
Loudspeakers, unearthed audio devices,
neon lights, high buildings and other large
objects can infl uence reception quality.
If possible, try to improve the reception
quality by changing the antenna direction
or moving devices away from the TV.
If reception on only one channel is poor,
fi ne tune this channel.
Check that the devices are connected
properly.
Check that the picture settings are
correctly set.
• Check that the TV location is set to the
home setting. This mode offers you the
fl exibility to change and save settings.
Try using a different picture format.
Picture signals from some devices may
not fi t the screen correctly. Check the
signal output of the device.
You may need to use a Conditional
Access Module to access content. Check
with your operator.
The TV is in mode. Remove the e-
sticker by setting the TV to
In the menu, select
>
menu. It is necessary to switch the TV to
standby to ensure that the TV exits
mode completely.
• If no audio signal is detected, the TV
automatically switches the audio output off
— this does not indicate malfunction.
Check that all cables are properly
connected.
Check that the volume is not set to 0.
Check that the sound is not muted.
Check that the TV speakers setting is on
in the sound menu.
Check that the TV audio output is
connected to the audio input on the
HDMI CEC enabled/EasyLink-compliant
HTS device. Sound should be heard from
the HTS speakers.
Check that the sound settings are
correctly set.
Verify that sound balance is set to the
centre.
mode.
>
>
55