Philips 37PFL8694H/12 User Manual page 34

•
EasyLink is enabled, allows remote
control key forwarding.
•
enabled, automatically applies the
best Pixel Plus setting if there is
more than one (for example, if both
your TV and DVD player support
Pixel Plus).
•
brightness of the front LED indicator
or LightGuide.
•
Teletext 2.5.
Press .
»
The TV preference is applied.
(Not supported on MHEG channels)
When watching TV, press
»
The demo menu appears.
Press the
demo.
Press to start the demo.
Press or
Resetting your TV to factory settings restores
default picture and sound settings. Channel
installation settings remain the same.
When watching TV, press
»
The home menu appears.
Press the
.
»
The menu appears.
Press the
>
Press .
»
TV settings are reset back to the
factory default.
When
When EasyLink is
Sets the
Enables or disables
.
to select a
to exit the demo.
( ).
to select
to select
.
Control other devices such as a DVD player,
a set-top box or a home theatre system from
Philips or other brands.
To return to TV mode from universal control,
press .
Use these keys to control the devices:
• : controls a DVD player, DVD
Recorder, DVD-R HDD or Blu-ray Disc
player.
• : controls a digital receiver or satellite
receiver
• : controls a home theatre system or
an amplifi er.
Before you use the TV remote control to
control another device, setup the universal
remote control mode.
•
For some devices, this feature is not
supported. There is no suitable RC code.
Press ( ).
»
The home menu appears.
Press the
.
Press .
»
The menu appears.
Press the
>
Press .
»
Follow the on-screen instructions. The
TV searches for a suitable RC code for
your device.
When an RC code is detected, press the
device.
»
The key blinks. Use the remote control
to control the detected device.
to select
to select
.
to control the
33