Philips 37PFL8694H/12 User Manual page 36

The fi rst time you set up your TV, you are
prompted to select a menu language and to
install TV and digital radio channels (if available).
This chapter provides instructions on how to
re-install and fi ne tune channels.
This section describes how to search and store
channels automatically.
Your TV searches and stores all available
digital and analogue TV channels as well as all
available digital radio channels.
In the
press the
Press .
»
A message appears prompting you to
start channel installation.
Press the
.
Press .
»
The channel update screen appears,
with
menu,
to select
.
to select
selected.
Re-install channels
Select Update channels
to update your current
channel list. Select Re- Update channels
install channels to search
and store all channels
again.
•
Leave unchanged unless your
DVB-C provider supplies values for
,
•
Setting
extend installation time signifi cantly.
•
If you have access to DVB-T and DVB-C, and
want to view channels from both networks,
you must perform channel installation twice
— once for DVB-T and once for DVB-C.
Select to install DVB-T channels and
select to install DVB-C channels.
• To switch between DVB-T and DVB-C
channels (see 'Access DVB-C and DVB-T
channel networks' on page 36 ).
Press .
»
Follow the onscreen instructions to
complete channel installation. When
channel installation is complete,
is selected and a list of installed
channels appears.
Press to confi rm your choice.
»
The TV exits to the
menu.
•
When digital TV channels are found, the list of
installed channels may display empty channel
numbers. You can rename, reorder or uninstall
stored channels as described below.
or .
to can
35