Going Into Standby Mode More Quickly - Toshiba Satellite A45 Series User Manual

114
Learning the Basics
Using Standby
The computer saves the state of all open programs and files to
memory, turns off the display, and goes into a low-power
mode. The on/off light blinks amber to indicate the machine
is in Standby mode.

Going into Standby mode more quickly

You can also put the computer into Standby mode in the
following ways:
❖
By pressing the hot key combination
See
❖
By pressing the power button
❖
By closing the display panel
To put the computer into Standby mode when you press the
power button or close the display panel, you must preset the
mode:
1 Open the Start menu, click Control Panel then
Performance and Maintenance.
2 Click the Toshiba Power Saver icon.
If you power down using the Standby command and the
battery discharges fully, your information will be lost. Be sure
to save your work often.
"Standby mode" on page
Fn + F3.
237.