102
Learning the Basics
Powering down the computer
To use a dial-up connection, have your network administrator
configure your computer for the network and supply you with
the telephone number for the dial-up connection. To set up
the network connection, use the Dial-Up Networking Wizard:
1
Click Start and point to All Programs.
2
Point to Accessories, then to Communications.
3
Click Network Setup Wizard or Network
Connections.
4
Follow the on-screen instructions.
The computer connects with the network.
Powering down the computer
When you power down the computer, you have a number of
options to choose from:
❖
Turn Off or Shut down, which power off the computer
❖
Hibernation, which saves the current operating state to
the hard disk and powers off the computer
❖
Standby, which saves the current operating state to
memory and enters a low power mode
❖
Restart, which restarts the computer
Pushing the power button before shutting down the Windows
operating system could cause you to lose your work. Make
sure the system indicator panel's disk light and the drive-in-
use light are off. If you turn off the power while a disk is being
accessed, you may lose data or damage the disk and/or drive.
®