Safety; Safety Definitions; General Safety Instructions; Symbols On The Product - Husqvarna 550iBTX Workshop Manual

2.1 Safety definitions

Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING: Used if there is a risk of injury or
death for the operator or bystanders if the
instructions in the manual are not obeyed.
CAUTION: Used if there is a risk of damage to
the product, other materials or the adjacent area
if the instructions in the manual are not obeyed.
Note: Used to give more information that is necessary in
a given situation.

2.2 General safety instructions

WARNING: Apply a new warning label if a
warning symbol on the product is damaged or
missing.

2.3 Symbols on the product

Start/stop
Boost button
Cruise control button
Warning indicator/Fault indicator

2.4 Battery use and safety

• Use appliances only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
• When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or a fire.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritations or
burns.

4 - Safety

2 Safety
• Do not use a battery pack or appliance that is
damaged or modified. Damaged or modified
batteries may exhibit unpredictable behavior
resulting in fire, explosion or risk of injury.
• Do not expose a battery pack or appliance to fire or
excessive temperature. Exposure to fire or
temperature above 130°C (266°F) may cause
explosion.
• Follow all charging instructions and do not charge
the battery pack or appliance outside of the
temperature range specified in the instructions.
Charging improperly or at temperatures outside of
the specified range may damage the battery and
increase the risk of fire.

2.5 Special safety instructions

2.5.1 To remove and install the battery
WARNING: Always remove the battery before
you do repair work or do servicing on the
product.
WARNING: Assemble the product before you
attach the battery.
1. Disconnect the battery (B).
2. Remove the cable from the cable holder (C).
3. Pull out the clips (A).
C
4. Remove the battery.
5. Install in opposite sequence.
B
A
761 - 002 - 18.11.2019
A