Advertisement
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio/TV technician for help.
IMPORTANT: Changes or modifications to this product not authorized by the manufacturer could
void the radio frequency compatibility and wireless compliance and negate your authority to operate
the product. The use of noncompliant peripheral devices could cause the emission of radiation not
within the limits set by part 15 of the FCC rules. Only use peripheral devices tested to provide
electromagnetic compatibility when connected to this unit.
EXPOSURE TO RADIO FREQUENCY (RF) SIGNALS
Your device contains a radio transmitter and receiver. The radiated output power is far below the
international radio frequency exposure limits. These limits are part of comprehensive guidelines
and establish permitted levels of RF energy for the general population. The guidelines are based
on the safety standards previously set by international standards bodies:
• American National Standards Institute (ANSI) IEEE. C95.1-1992.
• National Council on Radiation Protection and Measurement (NCRP). Report 86. 1986.
• International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1996.
• Ministry of Health (Canada), Safety Code 6.
The standards include a substantial safety margin designed to assure the safety of all persons,
regardless of age and health. The exposure standard for wireless mobile phones employs a unit
of measurement known as the Specific Absorption Rate, or SAR. The standard incorporates a
substantial margin of safety to give additional protection for the public and to account
for any variations in usage. As with other mobile radio transmitting equipment, users are
advised that for satisfactory operation of the equipment and for the safety of personnel, it is
recommended that no part of the human body be allowed to come too close to the antenna
during operation of the equipment.
Your device has an internal antenna. Use only the supplied integral antenna. Use of unauthorized
or modified antennas may impair call quality and damage the phone, causing loss of
performance and SAR levels exceeding the recommended limits as well as result in non-
compliance with local regulatory requirements in your country.
To assure optimal phone performance and ensure human exposure to RF energy is within the
guidelines set forth in the relevant standards; always use your device only in its normal-use
position. Do not touch or hold the antenna area unnecessarily when placing or receiving a phone
call. Contact with the antenna area may impair call quality and cause your device to operate at
a higher power level than needed. Avoiding contact with the antenna area when the phone is IN
USE optimizes the antenna performance and the battery life.
Cedar 1-Year Warranty
Juniper Systems, Inc. ("Juniper") warrants that the Cedar brand products shall be free from defects in materials and workmanship,
under normal intended use, for a period of ONE YEAR from date of purchase, excepting that this warranty shall not apply to
battery packs, media containing software, or any accessories. Juniper warrants the following shall be free from defects in materials
and workmanship, under normal intended use, for a period of ninety (90) days from the date of shipment: battery packs, media
containing the handheld and desktop PC programs and owner's manual, and any accessories.
Warranty Exclusions
This warranty shall not apply if: (I) the product has been set up improperly or has been improperly installed or calibrated, (II) the
product is operated in a manner that is not in accordance with the instruction manual(s) and/or user guide, (III) the product is
used for a purpose other than for which it was designed, (IV) the product has been used in environmental conditions outside of
those specified for the product, (V) the product has been subject to any modification, alteration, or change by or on behalf of
customer (except and unless modified, changed or altered by Juniper or under Juniper's direct supervision), (VI) the defect or
malfunction results from misuse or accident, (VII) the unique device identification number on the product has been tampered
with or removed, or (VIII) the product has been opened or tampered with in any way. Parts that are excessively worn are not
covered under warranty. These may include, but are not limited to, the keyboard elastomer and switch matrix, hand straps, and
the touchscreen (if applicable).
This warranty is exclusive and Juniper will not assume and hereby expressly disclaims any further warranties, whether
expressed or implied, including, without limitation, any warranties as to merchantability, fitness for a particular purpose,
noninfringement or any warranties arising from the course of performance, dealing, or usage of trade. Juniper specifically
makes no warranties as to the suitability of its products for any particular application. Juniper makes no warranties that its
products will meet your requirements or will work in combination with any hardware or applications software products provided
by third parties, that the operation of its products will be uninterrupted or error free, or that all defects in the product will be
corrected. Juniper shall not be responsible for software, firmware, information, or memory data contained in, stored on, or
integrated with any products returned to Juniper for repair, under warranty or not.
Remedy
In the event a defect in materials or workmanship is discovered and reported to Juniper within the specified warranty period,
after evaluation by a technician at a certified repair center, Juniper will, at its discretion, repair the defect or replace the defective
product. Replacement products may be new or reconditioned. Juniper warrants any replaced or repaired product or a period of
ninety (90) days from the date of return shipment, or through the end of the original warranty period, whichever is longer.
Limitation of Liability: To the fullest extent allowed by law, Juniper's obligation shall be limited to the repair or replacement of the
product. Juniper shall in no event be liable for special, incidental, consequential, indirect, special, or punitive damages of any kind,
or for loss of revenue or profits, loss of business, loss of information or data, or other financial loss arising out of or in connection
with the sale, installation, maintenance, use performance, failure, or interruption of any product. Any responsibility and/or liability of
Juniper shall, in connection with a warranted product, be limited in maximum amount to the original purchase price.
Warranty Service: In order to obtain a warranty product repair, replacement, or other servicing, contact our customer service
department or fill out the Repair Order Form within the applicable warranty period. The customer must prepay all shipping costs
for delivery of the product to the repair center. Please visit our Repair Policies webpage for further details.
Governing Law: This warranty will be governed by the laws of Utah, and excluding the United Nations Convention on Contracts
for the International Sale of Goods. The courts of Utah shall have exclusive personal jurisdiction in case of any disputes arising
out of or in connection with this warranty.
Warranty Service and Materials include these items: analysis of problem by service personnel, labor and materials required to fix
defective parts or replace the unit entirely; functional analysis performed after repair; repair turn-around within 5 to 10 working
days of receipt unless special circumstances exist; shipping costs to return unit to the customer.
WARR-STD-HW
Advertisement
