Using the auto aspect
feature
When receiving 480i signal, the TV will automatically change the
picture size by reading aspect information
(1D-1 data) from the input
signal. If the signal does not include aspect information
(1D-1 data),
tile picture size mode you set is selected.
To turn on the auto aspect:
1. Press MENU, and then press • or • until the THEATER menu
appears.
DoEby
Virtual
OFF
TruSass
OFF
PECTURE
S_ZE
OFF
A
•
APE
•
PY_UR_
S_ROLL
V i DE_
X
C_NEMA
MODE
2. Press•or•to
highlightAUTOASPECT,
and then press•or
• m select ON.
Note:
Thisfeature doesnot operate for the antenna
(cable5and D VIinput sources.
MENU
AV4f D,,
DoEby
Virtua_
OFF
WOW
SRS
3D
ON
FOCUS
ON
TruSass
OFF
C_NEMA
MODE
VIDEO
4:3 Normal
16:9 Full
4:3 Letter box
Not Defined
Selecting
the cinema mode
When you view a DVD movie (3-2 pulldown processed) from a DVD
player connected to the ColorStream (component video) or DVI/
HDCP inputs on the TV, smoother and more natural motion can be
obtained by setting the CINEMA MODE to FILM (auto).
To set the CINEMA MODE to FILM (auto):
1. Press MENU, and then press • or • until the THEATER menu
appears.
2. Press • or • to highlight CINEMA MODE.
3. Press • or • to select FILM (auto).
NOTICE OF POSSIBLE ADVERSE
EFFECTS ON Plasma display
Avoid displaying stationary images on
your Plasmadisplay for extended periods
of time. Fixed (non-moving) images
(such as still PIP/POPwindows or blacW
gray bars in 4:3 screen picture or PIP/
POPformats) can become permanently
engrained in the Plasmadisplay.This
type of damage is NOT COVERED BY
YOUR WARRANTY because it is the
result of misuse.See item 33 on page 4.
DoEby
Virtue_
OFF
WOW
SRS
3D
ON
FOCUS
OFF
TruBass
OFF
PECTURE
SEZE
AUTO
ASPEGT
OFF
To set the CINEMA MODE to VIDEO (off):
Press • or • to select VIDEO in step 3 above.
38