Connecting A Device To The Dvi/Hdcp - Toshiba Flat Panel Television Owner's Manual

Connecting a device to the DVI/HDCP
Your TV's DV1/HDCP* 1N terminal is designed to accept HDCP
program material in digital form from E1A/CEA-861-compliant **
consumer electronic devices, such as a set-top box or DVD player
equipped with a DV1-D digital single-link OUT terminal.t
The DV1/HDCP IN terminal is designed for best performance with
1080i high-definition video signals, but also will accept and display
480p, 720p, and 480i picture signals.
Note: ThisTVis not intendedfor connectionto
and shouldnot be used with a PC Cpersonal
eomputerJ.
You will need:
• one DVI-D digital single-link cable
You will need:
Note: Forproperoperation, t he DVI D cablelength
shouldnotexceed 3m C98 ft5 Therecommended
length
is2m
C6.6 fO.
• one pair of standard audio cables
DVI/HDCP device
(for example, set-top box or DVD player)
* DVI/HDCP ... Digital V_sual I nterface/
High ban&vidth Digital Content Protection.
** EIA/CEA 867 compliance coversthe
transmissionof uncompresseddigital
video with high bandwidth digital content
protection, which is being standardizedfor
future reception of high definition video
signals
t Consultyour consumer electronicsdealer
for availability
Notes
• Make sure the DVI cable is fastened
securely to the TV and DVI device.
If the cable is not fastended securelyon
both ends, the TVmay suffer from picture
noise C3now") or have no picture at all
• Toensurethat the DVI/HDCP device is
reset properly, it is recommended thatyou
follow theseprocedures:
a) When turning on your electronic devices,
turn on the TV first, and then the
DVI/NDCP device.
b) When turning off your electronic devices,
turn off the DVIIHDCP device
first, and then the T7
TV
16