Changing Channels; Manually; Using Speedsurf - Toshiba Flat Panel Television Owner's Manual

Adding and erasing channels manually
After you have automatically programmed the active channels into the
TV's channel memory, you can manually add or erase specific
channels.
To add or erase channels:
1. Select the channel you want to add or erase, tfyou are adding a
channel, you must select the channel using the Channel Number
buttons.
2. Press MENU, and then press • or • until the SET UP menu
appears.
3. Press • or • to highlight ADD/ERASE.
LANGUAGE ENGLISH
ANTI/2 ANTI
4. Press • or • to select ADD or ERASE, depending on the
function you want to perform.
5. Repeat steps 1-4 for other channels you want to add or erase.
Changing channels
To change to the next programmed channel:
Press Channel • or • on the TV or remote control.
To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (0-9 and 100).
For channels 100 and higher, press the 100 button, and then the
next two numbers. For example, to select channel 125, press
100, 2, 5.
Changing channels using SpeedSurf
To change to a specific programmed channel using SpeedSurfi
Press and hold Channel • or • for about one second. The TV
will enter the SpeedSurf mode.
TV front panel
MENU _1•TA
Channel TA
Channel
Number
MENU
IIEII
:_
Upper channels
t
Current channel
Lower channels
Channel label (if set)
Repeatedly press or hold Channel • or • while the SpeedSurf
mode is on-screen to scroll the channel list. Release the button to
display the highlighted channel.
31